Search results for:

sold, thanks

http://recyclebikes.co.uk/news/on-one-macinato-fixed-gear

On One Macinato

For Sale Salsa Casseroll complete bike, photos here:

It’s the first generation frameset designed for long reach sidepull calliper brakes with straight bladed fork (not the later model with canti bosses) made from Salsa Classico double butted cromoly. Salsa’s description and geometry here:

The frame is pretty versatile, with semi horizontal rear dropouts allowing gears or fixed/singlespeed, proper mudguard clearance and mudguard and pannier rack mounts. The effective top tube is 58.5cm, the seat tube 60cm (centre top) with a headtube of 185mm. I think Salsa list it as a 55cm (which appears to be the distance from the centre of the bb to the top of the top tube).

I bought the frame second hand and built it up as a fixed gear with mostly new components several months ago and have only ridden it a few times. I built it up as a run around but it ended up too nice and I was reluctant to leave it locked up so have replaced it with something less shiny and it is now surplus to requirements.

Spec as follows:
Frame and fork: Salsa Casseroll (bought second hand in good used condition, some minor paint damage see photos)
Rear Hub: Surly Ultra New (bought new for build, 130mm fixed/free, 32h)
Front Hub: Deore DX (an old hub I had lying around in very good condition, 32h)
Rims: DRC ST17 (bought new for build)
Spokes: Sapim DB (rear 3 cross and the front 2 cross)
Tyres: Continental Ultra Gator Skin 700 x 28c (had these already, very good condition)
Crank: Sugino 172.5mm (had lying around, old but hardly used)
Chainring: Surly Stainless Steel 42t, 3/32”(new for build)
Sprocket: Steel 16t, 3/32” (new for build)
Chain: Campag Record 9 speed
Saddle: San Marco Rolls (new for build)
Seat post: Ritchey Classic 27.2mm (new for build)
Stem: Ritchey Classic 120mm, 31.8mm (new for build)
Bars: Ritchey Classic 44cm (outside to outside), 31.8mm (new for build)
Bar tape: Fizik (new for build)
Brake levers: Cane Creek SCR 5 (new for build)
Brakes: Shimano BR R650 (new for build)
Headset: Cane Creek 110 (very nice, new for build)
Bottom bracket: Shimano UN 91 (had already, very good condition)
Pedals not included

There are 22mm of spacers under the stem.
The distance between the top of the seat and the centre of the bb in the photos is approx. 81cm.

I’m in Sheffield, happy for buyer to collect or can arrange a courier.

**£650.00 (plus postage if required) **

thanks for your interest, but I have sold the bike privately

Sorry for late reply, have a buyer but not finalised yet. Will let you know if it doesn't work out, thanks

Evening, serial number on rear drive side drop out is 6C532

i'll have a look when i get home this evening and let you know

thanks

Price drop, £500.00 if anyone's interested

thanks, it's been a good bike

Off the bike for a while following advice of physio, so decided to try and sell a couple and bank the cash. First up the fixed gear, not the best for a bad back in a hilly city. I love this bike and sad to see it go but it needs to be ridden so here it is (will happily donate to forum if it sells)
Colnago Tecnos Fixed Gear
http://www.flickr.com/photos/65235011@N02/sets/72157629861000908/
60cm seat tube (c-t) 58cm top tube (c-c)
Columbus Tecnos tubing
Colnago Precisa fork (re chromed)
Campag Record headset
Campag Strada (170mm) cranks, Campag 48 tooth chainring
Nitto Pearl stem 120mm
Nitto handlebar shim 26mm to 25.4mm
X Lite Cross Country Handlebars (50cm wide)
Campag Record front brake
Miche Primato Hubs/Mavic CXP33 Rims/Stainless DB spokes/Front radial/Rear 3 cross/18 tooth rear sprocket
Selle Italia Flite (Ti rails) Selcof seat post
MKS Sylvan pedal/MKS toe clips (large)
*Rear chainstays replaced with genuine Columbus by vetran Dronfield framebuilder Vernon Barker, original BB and rear drop outs. Spray can paintjob by me
Lots of photos here: http://www.flickr.com/photos/65235011@N02/sets/72157629861000908/
Don't want to split
£550.00 (will happily donate to forum if it sells)
In Sheffield for pick up/viewings or will post
Happy to answer any questions

Having a clear out and have stripped down a bike i've been running fixed, and selling the frame and fork. It's a 60cm Rossin, metallic blue with a chrome back end. It's in good condition, paintwork is a little bit tatty, but the chrome is in great condition. It has some nice details, a R cutaway in the base of the BB, and R on the rear brake arch, Rossin embossed at the top of the seat stays and Campag drop outs.

I'm selling it with a Columbus chrome fork which i have been running with it. The chrome on the fork has seen better days, it is pitted the worst of it up at the top of the fork on the inside under the crown, it's only cosmetic and not flaking off. I've put some details in the photos.

http://www.flickr.com/photos/65235011@N02/sets/72157627332321044/

It's got a 60cm seat tube (centre-top)
a 58cm top tube (centre centre)
a 17.8cm head tube
The back end has been professionally cold set to 120mm to take a track hub
Fork steerer 21.7cm 1" threaded
Italian BB

£125 plus postage

i also have ( photos on the flickr with the Rossin) the BB i'd been running with it a UN 72 with a 107mmm axle and a 25th Annervary Dura Ace headset which had also been fitted. i will happily sell these along with the frame if anyone needs them. Price negotiable.

Thanks

The DMR revolver is a 36 hole, it's silver, it's 135mm o.l.d. threaded one side for a freewheel and the threaded on the other side for a DMR disc adapter (which i've not got) it's got a quick release axle (no skewer), which is internally threaded to accept a bolt and washer configuration, which i have in original packet. It's new never used but a bit tatty due to storage without a box.

I've put a few photos on flickr

http://www.flickr.com/photos/65235011@N02/sets/72157627209523393/

if it's any good for you i'd take 25 pounds including postage

thanks

I've got a DMR revolver single speed hub, unused in silver. i've had it stored for a while now and never used it. I'll check when i get home whether it's 32 or 36

I've got a pair of wheels i'm selling, bit more expensive than you were thinking but thought i'd let you know anyway. Miche track hubs, Mavic Cxp33 front/Mavic CXP10 rear, Sapim double butted spokes. Front wheel hardly any use and Spanish lace spoke pattern back wheel has had some use but still in very good condition. I'm a working mechanic and built both myself. £100 plus postage. Can put you some photos on Flickr if you want if you want.
thanks,
Paul