-
Price Drop to £230
-
Yes still available
-
Sold to @Thrasher. Genesis I’d still available.
-
Sold pending payment
-
Price drop to £430, will donate to the forum too.
-
Would suit a wide range of heights probably from around 5’ all the way to 5’10 and possibly even taller.
-
Bike as shown it is a Bridgford Priory
Price: £100
Collection in Hammersmith.
-
I’ve owned this since 2020, but could have been their project prior to that perhaps?
-
Size 56 C-T
-
This is a bit of a museum piece from the original Mash SF days. There isn’t loads of info on the internet but the link below basically outlines why this Genesis Flyer looks so much better than the normal version.
https://www.bikeradar.com/news/first-look-genesis-x-allcity-creative-flyer
Genesis flyer Reynolds 520 frame with tensioners in the drop outs
Genesis bars and stem
Genesis seat post and saddle
Original wheel set
Original cranks (or so I believe)
Brand new (1 ride) continental Ultra sport tyres
BLB basket
Old style pedals without any straps
I think I’ve changed the chain to a very heavy duty one
Shimano 105 brakeThe bike has a flat front tyre and as I don’t have tools with me or a puncture repair kit then I’m afraid it will be sold that way. Tyres have only been ridden on once so I must have pinched the tube when I fitted it, or got a puncture on the first ride. It must be a slow puncture because it was fine when it was last parked up.
Price : £250
Collection in Hammersmith -
Cinelli Vigorelli 56 C-T
Owned since around 2014 hasn’t had a particularly hard life but I have done several 100km+ rides on it. Frame is in good condition with a few minor marks but no damage.
Selling as it isn’t getting used as much as it should.
Cinelli Vigorelli frame
Cinelli pepper bars
Cinelli pista Stem
Cinelli Vai seatpost
Charge saddle
On-One external bearing BB and chain-set 45 tooth chainring that cost around £40 I forget the brand
Shimano Ultara brake
Mixed wheelset
Front - cheap but usable Mach
Rear - espresso rim with fix/fix hub and SS spokes built by a LBS
Panasonic gum wall 25c tyres with life left
Generic pedals with 1st gen Restraps from circa 2008.Good bits
Super responsive frame which feels special every time you ride it. It’s in good condition.Bad bits
The chainset has a hollow axel with the screw / plug missing on the non drive side. It has been like this for year and I’ve ridden hundreds of KMs on it like this but obviously isn’t ideal. I have tried to source a replacement but the 2 I tried either had the wrong thread or were too long.Price: £450
Collection in Hammersmith -
Ffs posted this in the wrong forum
-
Cinelli Vigorelli 56 C-T
Owned since around 2014 hasn’t had a particularly hard life but I have done several 100km+ rides on it. Frame is in good condition with a few minor marks but no damage.
Selling as it isn’t getting used as much as it should.
Cinelli Vigorelli frame
Cinelli pepper bars
Cinelli pista Stem
Cinelli Vai seatpost
Charge saddle
On-One external bearing BB and chain-set 45 tooth chainring that cost around £40 I forget the brand
Shimano Ultara brake
Mixed wheelset
Front - cheap but usable Mach
Rear - espresso rim with fix/fix hub and SS spokes built by a LBS
Panasonic gum wall 25c tyres with life left
Generic pedals with 1st gen Restraps from circa 2008.Good bits
Super responsive frame which feels special every time you ride it. It’s in good condition.Bad bits
The chainset has a hollow axel with the screw / plug missing on the non drive side. It has been like this for year and I’ve ridden hundreds of KMs on it like this but obviously isn’t ideal. I have tried to source a replacement but the 2 I tried either had the wrong thread or were too long.Price: £450
Collection in Hammersmith -
Great find! Unfortunately that would only work with a threaded headset though so wouldn’t fit on my Genesis Flyer.
-
Rack acquired.
-
Dibs Genesis seatpost proving it fits my flyer. 95% sure it’s 27.2mm.
-
Hi mate. Had a look on your insta and couldn’t see any pics of the bars, could you PM me a picture.
-
Doesn’t matter if the condition isn’t perfect.
-
Front rack needs to attach from the front axle, and through the brake hole on the fork. Must be compatible with a front brake too.
Something like this BLB one https://www.bricklanebikes.co.uk/blb-take-away-tray-blackBullmoose style bars for a threadless fork. Don’t have to be Nitto, tbh I would prefer a cheaper 2nd hand option. Ideally in black
-
@onyerbike would you sell the front rack shown in one of the pics? Dibs if so.
-
2nd dibs on the basket
-
Is it a clincher? I would only want the rim.
-
How many holes is the rim, and is it in alright condition. I’m after. 20h btw.
LFGSS
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
It currently has a 28 on the rear and 25 on the front. You could get a 28 on the front too, it may take a 32 but I can’t guarantee it. The rear would definitely take 32 or bigger.