Search results for:

Hi, anybody got an old stem and bars lying about? Bars could be flat or riser or swept or something like that. Not too fussy so long as they're silver and the stem is 70-100mm ish.

Done a search, but think these things are often buried in a "clearout".

SE London based

Please don't make me spend 6 quid on postage for an 8 pound quill stem on ebay!

Thanks

Dan

If anyone wants any of the other bits I'll hold onto them for a week or two (in SE4), and then find some charitable home for them (suggestions welcome)

I'd love it for the raceblades pls, and if anyone wants any of the rest I can hold on to them for you for a bit?

Is it just my imagination, or are there almost no rim brake wheelsets out there with campag freehubs? Carbon or otherwise? (apart from a fair few sets of Boras for silly money)

I know people say that for 11 speed, shimano cassettes work with campag shifters/mechs, but it just makes me nervous.

Max budget about £350, so not going to get anything very flash, but in case anyone has an old pair kicking about?

Thanks

Dan

If these had a campag freehub I'd bite your arm off. Not being very practical, I don't suppose you happen to know if it can be "converted" reasonably easily/inexpensively?

Many thanks for the help. I think it is italian (both shells are conventionally threaded the same way), so with a bit of luck you think this should fit...?

https://www.tradeinn.com/bikeinn/en/vp-monoblock-steel-ita-bottom-bracket/137578044/p?utm_source=google_products&utm_medium=merchant&id_producte=10777869&country=uk&gad_source=1&gclid=Cj0KCQjw1qO0BhDwARIsANfnkv_slO0XTuUcPwUqXQV6Y7woL4PhnBDOAee7jsMOgHCwqsd3Vfobk8oaAlFHEALw_wcB&gclsrc=aw.ds

It is just for a pub bike, and I'm a novice mechanic, so anything that works will do

Hi all, can anyone help with old BB bearings? How do I know if they need replacing (figure since it’s stripped down I might as well - and it’s from an old crappy eBay purchase) and how do I know what size. Spindle/axle is marked 70 = W =115

Thanks for any help!

Sorry - now gone

If that Master was a few cms bigger I would chew your arm off. Have always wanted one of those in Panasonic (or maybe Rabobank) colours. If you ever come across one in 56/57cm you know who to call.....

Sorry, should have said - cracks in both chainstays - looks pretty terminal to me.

But provisionally now taken

• if you can remove the seatpost and cranks! Seatpost seems problematic, but cranks just need a crank puller I think
  
  

Don’t know if the forks and headset might be useful to someone?

SE4

Thanks, but need to be silver I'm afraid

Does anyone have a crank puller they could kindly lend me this weekend please? For BLB square taper. Based in SE4

Many thanks!

Can collect round east or southeast London. Ideally less than a tenner each, so nothing fancy obvs

Thanks!

A fiver-ish per bit, or whatever anyone's prepared to offer that seems fair-ish? The Deda bars seem to be on ebay for £50 quid for good condition, but not so popular, so if anyone will actually put them to good use they're welcome to have them cheap.

Also have a "welded/ugly" type quill stem approx 110mm. Think it's 25.4 but not certain.

Thanks for tip re: search. Will do

Hiya, have got some cheap single speed wheels for an old Concorde frame, and the axle is too big for the front dropouts. Loads of info online about filing down dropouts to widen, but my first thought was to do the opposite and file down the axle a bit (prob cos I care less about the cheap wheels). Think I only need to flatspot the threads on opposite sides.

Doesn't seem to be any info online about this which suggests that it would be a very bad idea....??

Thanks in advance for any wisdom

Fair enough, no joy swapping, but any interest for a couple of pounds to put towards an ebay quill stem purchase?

I’d be interested in the group set (and maybe wheels) if you did split, and could collect

Took these off a BLB eBay purchase, and would like to replace with a ‘zero rise’ equivalent quill stem (100mm or less) and some flat(ish) silver bars. Anyone want to swap??

Stem is 80 reach 120 length and very ‘downward pointing’. Bars (taped) are 40 ctc or alternatively have some deda velocita (40 ctc). All 25.4mm clamp dia

Based SE4

Thank you, but thanks to neilbah's wise words a bottle opener has done the trick

Oh god, I'm really showing my ignorance here. Yes, sorry it's 1x on the front, but it's only a commuter, so just care that it works, if not completely perfect.

I should probably have said 44t might also do the trick - with my cycling I doubt I'd notice the difference

uh oh, I sense there's some chainring measurement I don't know about. Sorry, I don't know, but it's a 9/10 speed set up

Thanks, but my legs are too puny for 50t!