Search results for:

I think I've got one or two in the parts bin, I'll check tomorrow :)

You still Looking for one?

Ideally 1 1/8" steerer

Ideally 1 1/8" steerer

I'm after a large (60cm+) steel frame and forks for a cyclocross build, ideally Reynolds tubing.
I have a fixed gear Reynolds 531, with nice wheels I could swap/px

Manners cost nothing! :) safe riding guys.

A change of plan means my bike Arsenal needs to change, I've got a nice beater level fixed I'd like to swap for a steel cyclocross frame and fork (I'd consider a road frame with sufficient clearance)
It's a Raleigh Richmond frame and fork (Reynolds 531) with quite a few chips and scratches nothing serious though. Miche primato hubs laced to Aray RC-540 rims (32h) used with brakes which has created a nice finish, no real wear to the rim surface though.
Weismann vianqueur 999 calipers can be included but I'd prefer to keep the levers.
Custom chopped bullhorns, and beater stem and cranks (custom)
Italia TI saddle.
Frame is 24" I believe, photos to come.
Ideally I'd like a 62cm frame, will consider 60cm or more, and preferably Reynolds tubing.
I'll be in London 15th-17th so can bring it down with me
Will also consider selling to fund the project

In all honesty I was half buying it to save you going any lower in price for such an awesome bit of kit! Let @cgg have first refusal, if not let me know.

Ahh shame too narrow for me :( glws

Do you know the width? And clamp dia?

Any photos of the b115?

If you can wait until the 15th I'll take it

Do you need a 1 1/8 top cap then? To fully cover the stem?

I'll take whichever 2 Fullyclipped doesn't want - would prefer pewter or red though... Let me know I need the 1" top caps, I've got a 1 1/8" pewter

lines starting with a 'greater than' denote quoted text

Bump, I'm also after one of these if anyone has two lying around ;)

I recently picked up this ritchey Tig stem, and love the looks/design, but the clamp size is 25.4 which is proving awkward.
So I'm after a stem of similar design with a 26.0 clamp and also some wide, silver drops, ergo preferred

Pelissier Hubs Laced to Rigida Rush Rims
Hardly used 6spd Freewheel included.
As far as I can tell they're pretty rare so £40>35>30?

Time to empty the parts bin to make way for some more bike bling.
I'll be in London 15th-17th so cash on collection otherwise happy to post.

**Campagnolo Centaur CT chainset 10spd **
175mm cranks
48/34 chainrings
Non drive side crank has a crack in it so could do with being replaced.

Campagnolo Centaur BB
Drive side cup knackered
Bearings are nice and smooth
Chainset and BB =£30>£27>£24

Easton / ITM Cockpit
Easton EA50 42cm Ergo drop, double cable grooves.
ITM stem - 120mm - 10 degree I think
Few scratches that would be hidden by bar tape.
Nice and light.
£25>£22>£18

Thomson Elite Stem
25.4mm, 110mm, 5 degree
Great Condition
With Original Bag
£28>£25

Shimano SIS RD-L541
Nice condition
Appears to have had very little use.
£10>£8>£5

Stronglight Delta 1" headset
Bearings and races are smooth and un-pitted. with no discernable wear.
Some small scratches to cups - will be well cleaned prior to sale.
Crown race is sealed type, suffered slight damage when removed, could be straightened or replaced.
£25>£20>£18 - bearings alone go for £20

Weinmann Holey Brake Levers
Not too shabby
£5>£3

spacers and shims arrived today, bump for a great seller

I'll take the de Mayo if it's still available

I'm after an ahead stem, with a clamp similar to that of a quill stem (no faceplate) around 100 mm ideally.

I'm after some 25.4 drops, silver and nice and wide, some silver road skewers and some dura ace or ultegra 2x 10 speed derailleurs in silver.
Let me know if you have any of the above.
Cheers

potential dibs cinelli bars pending width and clamp size

I'll take the one inch bundle pm incoming