Search results for:

Last price drop, then I'll put it on the local classifieds.

600€

Price drop to 650€

Greetings!

Price drop to 650€

I'm selling my road bike regretfully, as it hasn't been ridden lately, only sporadically over the past two years.

Specs:

• Seattube: 56cm C-C
  
• Toptube: 57cm C-C
  
• Weight: 6.95kg without the pedals (with an upgraded gruppo & lighter fork sub 6.5kg should be easily doable)
  
• Groupset: Full Shimano 105 with a triple up front
  
• Wheelset: Mavic SSC (Carbon spokes) bought the wheelset NIB and put about 2k on them before I put the bike away. Wheels are 100% true and braking surfaces good with no concave wear.
  
• Full Carbon finshing kit (seat, seatpost, seatpost clamp, integrated 90mm x 41cm bar/stem)
  
• Tyres: Continental GrandPrix (70% left)
  
• Cinelli Mike Giant handlebar wrap
  
• Fibrax Superlight cable guides and teflon coated cables
  
  

The frameset was custom built by MIFA in Germany, probably for an employee there. I bought in Berlin and couldn't understand the full story, as I don't speak German, and the seller didn't speak the best of English. The decal on the bottom of the frame shows it was manufactured at MIFA, and the barcode, when scanned, shows a serial number of 01/01.

The tubes are beautifully shaped, hydroformed bare aluminum with a clear coat on top, smoothed welds, and carbon seat stays. It's a very light and responsive ride, and it climbs beautifully. I had her at over 90km/h on descents, and she is very stable.

What's bad:

• The top tube has some minimal scratches and chips in the clear coat that can easily be remedied, tried to capture them in pictures but they're barely visible. As shown in the pictures, a minimal dent from my cleat when swinging my foot over once. The dent can only be seen under certain light conditions and is otherwise not noticeable.
  
• The carbon seat has delamination in the seat part (not the rails) and makes noise occasionally. It was a manufacturer defect for which I got a refund, but I've ridden it that way for quite a while. So replacing the seat is debatable, I think.
  
• The downtube top water bottle cage mounting screw rotates in place. So I mounted it lower on one screw and the bottom of the cage with a ziptie. Any bike shop should be able to remedy that easily.
  
  

Other than that, the bike is stunning, shiny, and in great condition. Also a blast to ride. Had a hard time pricing this, so feedback on the price would be appreciated.

Link to all pictures:
https://www.dropbox.com/scl/fo/bq5dv4j5bqx48j4l4r5tj/h?dl=0&rlkey=zyunuglxb0vw7pbqccwex5bjr

Pick up in Warsaw, or I can ship to anywhere in the EU for an additional €40

Whats the seatpost size?

CAAD7 430
MOSER 450

Caad 7 450
Moser 470

Price drop. Caad7 510. Moser 530

Open to slight negotiations. Price suggestions etc.

Greetings,

I have two really nice bikes to put up for sale...

Cannondale CAAD7

Seattube: 58cm C-T * Toptube 58cm C-C
Groupset: Shimano 105 with Ultegra Crankset & Cannondale Brakes
Wheelset: Mavic GXP33 on 105 hubs
New brake and shifter cables
Very nice shape. ****Very small ding in toptube, barely noticable. Pictured in pictures.

550€+ shipping or local pick-up in Warsaw

Moser M78

Seattube: 55.5cm C-T * Toptube 56cm
Groupset: Shimano Dura-Ace 7700 including hubs.
Wheelset: Mavic GXP33 on Dura-Ace hubs

Very nice shape, carbon rear triangle.
Very rare, super responsive bike & quick bike.

570€ + shipping or local pick-up in Warsaw

More Pictures: https://www.dropbox.com/sh/m9q50rf3qf49v9k/AABauag7ZB-SMG_0Tob_RLt5a?dl=0

Hey Guys,

Parting out the bike after all. It has already been taken apart just don't have time to take pictures of the parts until Friday. Will update Friday with all parts pictured or if you're interested in purchasing any of the parts I'll try to take some detailed pictures sooner....

Wheelset: Dura-Ace C24 7850, 1380g, 8/9/10 with Zaffiro tyres, original DA skewers and the lightweight titaniam ones pictured... 228 Euros + Shipping

Mini Sram Rival 22 Groupset: Brakelever shifters, front and rear mech, cassette (11-28) & chain. 215 Euros + Shipping

Fulcrum RS Dark Label Carbon Crankset with 70mm ITA Campagnolo Record UT cups... 118 Euros + Shipping

Colnago Dream Frameset: With Cinelli Vai 90mm stem, Shimano Pro 1" Sealed bearing headset, seatpost clamp. (Takes a 27.2mm seatpost) The head tube has been professionally repaired, for a full description please check out the previous ad. https://www.lfgss.com/conversations/297835/
180 Euros + Shipping.

Prologo Carbon Rail X10 Saddle: 75 Euros + Shipping

More detailed pictures:

https://www.dropbox.com/sh/vab4fkvqevtpqk9/AAAYl0Ks0XXVnGzlmjfsFmZza?dl=0

Will post prices and better pics for all the other bits & bobs soon.

Decided to part her out. Will post new ad sometime today.

.

Thanks for that. Good advice and informative.

I'll drop the price 1000 euros. Still might be viewed as a tad high. If there's no buyer for that price I'll keep it.

Cheers!

?

Care to elaborate? I've sold dozens of bikes here and haven't had anyone give such constructive criticism yet.

Hey guys,

I'm forced to sell my beloved Colnago because of an unfortunate family situation...

Disclaimer: The head tube has been repaired as there was a small crack when I purchased the frameset (unknown to be at the time of purchase).

My aircraft mechanic friend (who repaired the damage) stop-drilled the crack, welded it, smoothed it, and took some reinforcing aluminium sheeting and welded it around the head tube (He also tested the carbon fork with an ultrasonic aircraft scanner to see if there was any cracks.. I wanted to make sure the fork was not crashed or damaged because of the head tube crack). Pictures of the repair are in the pictures link.

Then the frame was bathed in a chemical stripper to take off the original paint and was powder coated graphite and has new Colnago decals on top. The headtube is now stronger than from the factory and there is no detrimental effects in riding/handling. I've put (according to the odometer on the computer) just over 3100km on the bike after the repairs, and all the components on the bike were brand new out of the box for this build so they have the same amount on them. The bike is pretty much like new.

Frame: Columbus Altec 2 Plus (Pro Racing) Tubing
Size:
Dowtube 54cm C-C (56cm C-T)
Toptube 54cm C-C

I'm 185cm, bike is set up with a 78.5cm saddle height (top of saddle aligned with downtube to centre of BB) , 52.5cm reach ( tip of saddle to centre of bars) my inseam is 89cm.

• Brake Lever Shifters: Sram Rival 22
  
• Front & Rear Mech: Sram Rival 22
  
• Cassette: Sram Rival 11-28
  
• Crankset: Fulcrum RS Carbon Black Edition 53/39 172.5mm(Fulcrum Branded Campagnolo Record)
  
• Bottom Bracket: 70mm ITA Campagnolo Record
  
• Handlebars: Shimano PRO PLT Compact 42cm w 12cm drops
  
• Stem: Cinelli VAI 90mm
  
• Headset: Shimano PRO 1" threadless (Sealed Bearing)
  
• Seatpost: Ritchey Carbon WCS 27.2
  
• Saddle: Prologo Nago Evo Carbon X10
  
• Bartape: Prologo One Touch Gel
  
• Wheelset: Dura-Ace WH-7850 C24 Carbon Clinchers (1380g) 100% true. Have been trued once after purchase, mint shape
  
• Lightweight Skewers & Jockey Wheels (The bike comes with the original jockey wheels for the rear mech and the original DA skewers for the wheelset as well)
  
• Brake Calipers: No Name (The last upgrade which I'd never gotten around to doing)
  
  

Bike comes without pedals & framepump.

Detailed Pictures: https://www.dropbox.com/sh/vab4fkvqevtpqk9/AAAYl0Ks0XXVnGzlmjfsFmZza?dl=0

I haven't weighed the bike, but I'd guesstimate it to be around 7.5kg with the pedals, framepump, bottlecages and computer.

Price: €1200 + Shipping or pick up in Warsaw

.

Hey Guys,

I'm putting these out for a friend of mine and fellow collector and vintage nut..

Basso Ascot
He wants 900 Euros, pretty sure he'd be up for some negotiation.
Seattube 56cm C-T *** Toptube 55cm C-C
Columbus MS tubing
Groupset Miche Primato except Gipiemme shifters, Modolo brake levers and Cinelli handlebar and stem, freewheel Suntour. All in good condition.
San Marco saddle.
Frame is in great condition, paint is good but take a look at the top tube as it has a few signs of wear.
New tubulars, cables, cable kit and tape.

More pictures: https://www.dropbox.com/sh/8uhndickcwtbj2q/AAAVrMi2dNjBdf0gPprnBFQ7a?dl=0

OSCA 630 Euros
Seattube 56cm C-T *** Toptube 56cm C-C
The frame was built in Poland by an Italian framebuilder Osvaldo Cazzanige in the mid 80's
Columbus SL tubing
Groupset is a mix of Polish Campagnolo copies, some DA, some Campagnolo. If you're interested I'll put you in touch with the owner which will give you a full description

More pictures: https://www.dropbox.com/sh/atn739j72eol1id/AABa1oq-TAzmymohepyJ8Q6va?dl=0

If you have any questions pm me and I'll put you in touch with the seller.

Bikes are located in Warsaw and will ship anywhere in the EU for around 20-30 euros.

.

Sold...

Thanks! I'm quite surprised no one has bought this myself.

290.........

Hey Guys,

I'm putting this out there for a friend. The wheels are located in Warsaw for pick-up or can be shipped anywhere.

Pictures: https://www.dropbox.com/sh/qrisjxd2dm65epw/AAAtSzvkhKbb9bf0O21Rr2Lja?dl=0

1. Front Campagnolo Shamal 650c:
   Campagnolo C-Record Hub
   Original spokes
   New Vittoria Juniores with painted sights
   Rims are in good conditions 7/10
   One indention (on photos) That can be fixed.
   190euro + shipping and paypall fees

2. Rear:
   Rims: Mavic Open Pro CD 700c
   Spokes: Sapim Laser
   Hub: Mack Superlight fixed-fixed

Rim and spokes are almost new (I had few rides on it).
Brake surface intact.
Hub with mechanical bearings.
210 euro + shipping and paypall fees
I can sell all set for 350 euros

Prices are negotiable.

A bit to far I imagine. Warsaw... But thanks for the offer!

And everyone's info!

I was wondering if anyone knows what a good cheap source of practice tubesets for lugged & brazed construction is.

I would like to build a few frames that will probably go to the bin without spending too much $$.

.