-
-
Saddle like what sorry? It's a badly angled photo, but the saddle is actually horizontal (rails are parallel to ground) if that's what you mean... must take some vanity pictures some point.
Edit, or if you meant so far forward, it was the setup from riding on the tt bars a lot with the current stem.
-
-
-
-
-
-
-
-
-
-
-
Bad ankle pain (inside directly on the bone and above). Was symmetrical, but has healed quicker one side than the other leaving me sore.
This is after the 100 miles last week. I thought it was an overdoing-it injury, but week later it's still creaking as I move.
Any clues what to change? It was a long, long ride but not had the issue before with any of my bikes. I have little or no float in the shimano cleats, but as said, wasn't a problem before on 90 miles up hills and stuff, and never a problem on 30-50 mile rides with the setup unchanged.
As far as I can see, my feet remain quite level, I don't point toes down much or at all, and the cleat is back as far as possible to avoid this anyway. Maybe angle?
-
-
-
-
-
-
-
-
-
Gonna cycle from Swindon to London tomorrow. Looks like it's the easier direction with barely any incline over the 100miles (to return would be all uphill, maybe I wimp out and take the train back).
Going to test out the 2010 'dale synapse carbon with the giant KTM seatpack and a small backpack. Must see if it handles well enough to use as an ultralight road-only bikepacker.
-
Consider it a guide ;) the file says it was last updated in 2011, so there's a whole bunch from 2011-2015 that aren't on the list. I'm keen to keep hold of the collection but don't mind selling a couple if it suits. If there's anything let me know, and I can see if there are others not listed that are similar.
-
First time I've looked at the Kuota since the summer. Tried a 10spd cassette on the Juna Ozzo trispoke, and it fits fine, it was a little tight to get the lockring on, but it locked down with enough turns, and enough space for the axle to clear the cassette on the bike. Maybe spacing it a little won't cause any dishing problems, but might give a little extra safe clearance, tolerances are tight at the mo. Maybe I'm just nervous after seeing oodles of space from the 7spd cassette on a 9/10spd freehub.
Big question, not sure how to phrase it or I'd use the forum search:
I thought the trispoke was out of true, because there's a bit of a wobble. Noticed as I spin the wheel on the bike that when I let it freewheel, the cassette (static) also follows the wobble, does that make sense? It's like the axle is a little bent? As if the whole wheel moves across a little from the hub.
Could there be something bent in the hub? Or is it loose parts? The wobble is consistent, always a dip in one direction at the same point of rotation (like a wheel out of true).
I found it was so long that I keep forgetting all the good stuff that it had through it, but days later I know it had good stuff. I like the variation in scenes, except the extreme close up use of wide angle, that irked me a little, but if that was the only issue once or twice in 2 1/2 hours, it did well.