Search results for:

Don't know if this is the correct place to post, but it's concerning the front mech of my Chorus 11 speed groupset.

It won't change to the big ring. Increasing the cable tension results in the mech popping back to the second 'click' after shifting 3 clicks upwards (if that makes sense). High limit screw is set so the mech is as far from the frame as possible.

Any ideas? Could I maybe try to position the whole mech more towards the outside? Kind of my first time setting up a Campagnolo groupset/mech.

Not trying to be an ass, but that build is a mess in my opinion.

Very good.

Toptube protector is for show? Or are the bars so wide they touch at that point.

Depends on the chainstay length.

You can use this calculator: http://www.machinehead-software.co.uk/bike/chain_length/chainlengthcalc.html

This one is pretty hard to beat:

Haha that's tiny! Paint looks good though, better than mine.

Both the seat- and headtube seem very slack. Maybe the frame wasn't designed for a 700c front wheel?

Edit: 650c wheel might look like this:

Angles don't seem to be over 70 degrees in the original picture. Bottom bracket also seems quite high.

what's up with that headset?

Seems like a quill to ahead converter?

don't know how to link insta

Add media/?size=l to the end of the link to get the direct url of the image:

https://instagram.com/p/rNMtSHLCGV/media/?size=l

If you're running that in singlespeed/freewheel mode, you might wanna look into getting a rear brake as well.

Think the miche ones are 135

Miche Primato Advanced chainrings are 144 BCD.

Unscrew the clamp bolt so it comes out of the far side of the clamp entirely, then put a coin in the opening between the clamp and screw the bolt back so it touches the coin in between the clamp. Now when you tighten the bolt, it pushes against the coin and opens the clamp further. Don't push it too much though. You can also use some soap/grease on the bars to make them a little slippier. That's how I did it with my compact bars and quill.

Do ittt:

Comfort is overrated! But seriously, obviously put the bars at the height you need them to be.

Stem craves slammage.

Very nice frame and bike. Loving the all silver. I want an all silver bike as well.

What bars are those? Deda Piega?

Picture doesn't work for me.

I like that top cap though. Probably anti, unless you put it on a tourbike maybe?

This thing is awesome!

Surely this belongs in pr0n?

Post it here: http://www.lfgss.com/microcosms/548/

@voxelwise is the new @TheSadR confirmed.

No clue dude, I just found the picture!

If I had to guess it's probably steel sheets because it's welded.

Thanks. I should probably put my desire to have equal width tyres aside then and go for this option.

23 + 25 means equal pressure (unless you're fat or upright or both).

Luckily I'm neither!

Thanks. This was my initial plan, but I thought it might be neater to have the same width tyres. Will probably go for this.

Not sure why that won't embed

I don't think you've got the proper link:

https://instagram.com/p/2l5e52AxOd-c-byoMplpxOMNIGwY5o8j0qrYU0/?taken-by=maxharper96

Doesn't look like a link to a actual picture.

To which question? Or are you having a laugh.