Search results for:

some White Ind porn

debuild unstructions

vertically stacked

Cyclo BMX remover -- fits ok, better than icetools one

pawls inside the 22t ring i intend to swap in

flatstacked

Mario here has 70s NOS single freewheels
http://www.defietsenmaker.nl/index.php?item=regina-single-speed-freewheel-16t_&action=article&group_id=10000052&aid=1862&lang=EN
**Regina single speed freewheel 16t .. 1/8" chainfit

EDIT: drawback is -- u need to take it to clapham cycles to remove it
**

i HAD been considering a Token sealedbearing freewheel ..

their pawls are directly underneath the teeth, unlike the offset-pawls on WI

ive just bought an preloved WI 17t from the classifieds here

and a Cyclo 4-prong remover, which im assured works, seems fits better than the Icetools 4prong BMX anyway

tho since ive also bought a 22t chainring for it, im considering the 33gbp proper tool for it from sideways

i fully intend to get a 20t for it ... after i get a bit fitter tho

i replaced my well-worn+reversed TA 50t front ring with a 44t TA 1/8"

just waiting now for an injustible pin-spanner [*red* one is recommended]

Shimano.

Token

[scrub all that backend nonsense, just picked up an White Industries 17t

and ordered a 22t ring for it

which will allegedly fit

might as well start at the top eh, get an bit of a spinny goin

44x17 -- meh, barely perceptible change from x16
44x22 -- now we're talking
](https://www.lfgss.com/thread114302.html)

I went to LBS and they kindly removed one for me for free...
The London Cycle Workshop in Clapham. Good guys in there

cheers, sounds hopeful

i think i have a visa for sarf lunnun

campyoldy 2-dogs are for Regina multi-speed blocks, and wont fit this, according to Nigel

YAY campoldy lists http://www.campyoldy.co.uk/stocklist.htm
Regina 2 dog remover for GS, ORO freewheels

cool :: cheers!

has to be this
http://www.parker-international.co.uk/18459/Park-Tool-FR2C-freewheel-remover---SunTour.html

or this one
http://www.parker-international.co.uk/16159/Cyclepro-Freewheel-Remover---Suntour-2-pin.html

just bought a used White Industries 17t on here

with all the spares available from tartybikes, i should be set up ok

i need to remove an oldo Regina freewheel

2-prong type

im sure the old 5-speed block remover would do it

id hate to have to hit it with a chisel

yup

dibs, pm'd

ah, ok, i see what yer sayin, cheers

hm, max teeth 18t

yup, ima get a Dicta 20t + 22t, see which ratio suits me best
easy to remove + replace with a sealed-bearing version

i dont see Token on there

u thinking of **White Industries ENO Trials ?

token are about half the price ..

also they can be got in either 3/32 or 1/8" -- which is what i want
**

http://www.tokenproducts.com/upload/12-a4%281%29.jpg
Can anyone recommend [or diss] these cheaper, Taiwan-made alternatives to the White Industries freewheel?
http://www.tokenproducts.com/index.php?option=technology&language=en&mod=10&class=1&site=list&action=read&id=8&page=1

right then, got it all up n running, swapped out the naff noname 3/32" freewheel for a NOS 70s Regina, also 16t

but i think i want to drop gear ratio again, maybe i go a 20t

hmm .. should i maybe get an cheapo BMX 1/8" 20t first to see

thinkin on a Token sealed-bearing jobbie for the long term

right, ive bin wearing this Red Level Short Sleeved Mesh Baselayer / Black / Small 4.99
excellent value for a fiver, good length
the Red Level Neck Warmer seems nice too, its not cold enough to need it tho
its got a nice thin/light quality to it

so what was the putty for

just to hold the bolts in place for tightening-up?

PITA, whatever

hm, BBG seem quite similar to, but not the same as, what was on there, with a 50t TA

which was on backwards, i guess he'd turned it to get more miles
whats odd is the that ringbolts were puttied in
something like putty, anyway
ive got a gebhardt plainring, but its also far too big despite being described as ok for 44t on the site i got it from

my last bike [on a Tom Board cross frame, now stolen] was 5-speed but with 10-speed campag oldo record chainset, with filed-off teeth on the outer ring ..
mb if i stick with 44t i'll catch a TA ring and file it too

http://www.livememe.com/agbo75t

im dropping the ratio on this Trek soho with track ends + a flip-flop

currently its a 50t TA 1/8" ring on the front, with a chainguard ring, to be swapped with a 44t TA ring + smaller Gebhardt chainguardring

16t noname 3/32" freewheel being swapped out for a ol NOS Regina 1/8" 16t :: question here is, am i being obsessive by changing to 1/8", makes sense to me but:

them dear rebuildable american freewheels fit both chainsizes, which im not that keen on

geezer in NL sold me the chainguard but sent a 135 instead of a 130, replacement just arrived, im all set to bitswap

the 130 bcd chainguard is significantly larger than the 44t, tho not illegally so, but might fit a 47t better

any hints where to find a 130 bcd chainguard to suit a 44t?

hardly a hi-value order, but my first from them

so lets see .. i paypalled planet-x on the 16th

dispatched email received today ..

i wanted a look at RED mesh-layers, i have a advanced-mesh from somewhere else, but longsleeve; which i think works well for mesh-under-tech layering
if id had it quick i might have catched a few more

and i do need a good throatwarmer
i haz radiotherapy on my throat upcomin