Search results for:

Raceware Direct definitely do what you want, just more pricey.

This one seems to fit from either side of the stem.

I might have a suitable fork, how much steerer do you need? It's red, so expect at least a 13.452% increase in top speed.

The smaller capacity one can do Qualcomm Quick-Charge.

Edit: @hippy spotted it. The Qualcomm version is only for certain devices, but does work well. Both batteries can be charged themselves with the Qualcomm Quick-Charge though. Otherwise it's down to the devices to negotiate the charging current. Same way that some wall chargers can dole out ~2A (for tablets) but an old phone won't accept that much.

As above, I'm looking for a black 110mm/0deg threadless stem for 1 1/8" steerer and oversize bars.
Thanks in advance!

I managed to find one spare at a bike shop - thanks for getting touch nonetheless!

2nd (?) dibs on the king cages if @Dumps doesn't want. Work in SW7 so happy to meet.

Enough for you to be able to fiddle the connector into place. There's no need for masses of slack. A cable tie can be useful to hold it in place if needed. I normally wrap the cables around the tubing with a cable tie either side of where it jumps the headset (to make sure it doesn't pull too tight).

Will take some this evening.

I've got a plastic and a metal one if anyone is keen. Plastic is for gratis, metal (cantilever style) for a beer or two.

V-brake style pads have two interchangeable hemispherical spacers and a washer. Swap them around either side of the cantilever arm to give you more (or less) space.

@peter_v you want 27.2 mm.
28.6 mm outer diameter - 2x 0.7 mm wall thickness = 27.2 mm inner diameter.

I have 2 pairs of Dura-Ace downtube stops (as seen below and here) for alloy frames (flat not curved back). I ordered these and didn't notice they were for alloy frames, so they're all there and unfitted.

I paid £12/pair so would like to get that back, but will do £20 for both.
Happy to meet most places west of Holborn or can post.

Anyone have a 31.8mm -> 28.6mm shim for a 6700 band-on front derailleur? Apparently it's the same part for all of the 6700, 5700 and 6600 series mechs and I can't see why it should be much different for any other types. Happy to pay in beer/swap for other obscure parts!

Anyone have a 31.8mm -> 28.6mm shim for a 6700 band-on front derailleur? Apparently it's the same part for all of the 6700, 5700 and 6600 series mechs and I can't see why it should be much different for any other types. Happy to pay in beer!

I store mine (near) vertically at work and I have to pump the lever a few times to get the feeling back. Haven't noticed a long term drop in performance though...

Is the adapter mounted backwards? I can see an arrow on the adapter that I would expect to point forward. It certainly looks like it would bring the calliper into the right position.

Haven't really had a chance to properly take my IQ-X out in the dark, I'll be interested to see what it's like compared to my CYO.

You're probably better off getting separate items. Only light that does all-in-one is the B&M Luxos, but it is known to have some issues with waterproofing. If you're serious about either then get a good light (can personally recommend the B&M IQ-X as a good light, others like the supernova and edelux) and separate charger. @acharnley is the man behind the D1 which looks very good (it's what I would buy right now), the sinewave revolution also has its fans here.

Or Zefal HPX if you have a pump peg and want a classic look.
If not then another vote for a Lezyne Micro Floor Drive, it is very good.

Queens Arms is better/nicer IMO

Bugger, meant to reply to you. See above.
Edit: new page fail too. FFS.

@mattioats
Queens Arms
Builders Arms

All the lecturers/fellows at IC have been wandering around here looking sad and talking about validity of grants/availability of visas for students/postdocs. It's all rather frustrating.

May have been me...? All City Space Horse with a large carradice saddlebag.