Search results for:

Sorted. Would love 2 pairs of Mini-V's, Tektro or similar if anyone has. Thanks.

Dibs the rim, sending pm now.

Morning all.

In an ideal world you'd have a need for a massive, fat Kryptonite New York lock (2.6kg), with 2 keys - to keep at work, say - and I'd take your smaller, lighter but still upper end of security spectrum D lock in exchange.

Unlikely I know but worth a try. Cheers.

Thanks rhb, I've pm'd. Cheers.

Thanks in advance to anyone who might be able to sort any of the below out:

You might want to lend for this weekend ideally (a one-off so don't want to buy, would gladly give a couple of cans though to someone who could supply all the little bits till Monday!):

• a Hollowtech II BB tool
  
• the little wheel thing insert to tighten the bearings on above
  
• less important but if you also had 18 and 20mm cone spanners that'd be great.
  
  

You might want to buy bullhorns, Profile Design Airwing regular clamp, not O.S., shown previously here, still available. Not many scratches but bits of gum etc. £14.

now sorted for chainring.

Thanks.

Seeking one chainring 104bcd, 42t, four arm, for a single speed so preferably not ramped etc

Thanks.

These take the regular (ie 25.4 - 26mm) stem clamp, have holes and grooves for internally routing brake cables, are almost completely unscratched but do have gum residue from bar tape (suppose that would either be covered up or would come off with some white spirit).

Would like £14, pending payment, provisionally sold to Doe. Thanks.

Doe's out, they're for sale again

These take the regular (ie 25.4 - 26mm) stem clamp, have holes and grooves for internally routing brake cables, are almost completely unscratched but do have gum residue from bar tape (suppose that would either be covered up or would come off with some white spirit).

Would like £14, pending payment, provisionally sold to Doe. Thanks.

Looking for a pair, if possible, of 700c clincher rims, 36h and wide enough to take 32-5mm tyres. Cheers.

[No longer] Looking for a rear hub etc etc

Any news from HarryB about the mudguards? Thanks.

Sounds like a pompino to me.

Cheers Emyr! I hadn't thought of that - my head was stuck on a 80s/90s frame ie pre-vertical dropouts.

Good tip.

Ok if anyone is selling a large Pompino, or old tourer/cx frame, I'd be interested. Thanks. This is a budget project so not looking for anything fancy.

Evening

I'm looking for a steel cross or touring frame with horizontal dropouts and canti bosses - around 58/60cm on the seattube - if you know of one.

Thanks.

Dibs-ing on the mudguards if HarryB doesn't take them...sending a pm now.

Afternoon all

Just moved up here a month ago but not really spent much time in the centre yet. Next couple or weeks I'll be in and around quite a lot though - wondering if any areas in particular not to lock up or, more usefully, any tips for places that seem safe?

I know it's all a gamble and bikes get nicked everywhere but still, no harm in trying to lower the odds.

Cheers!
Adam

Hi - did the saddle get sold to tokaicarl? 4)Ridge back brown saddle-£5

If not, I'd gladly give you a fiver this week for it...

PM'ing you now in case. Cheers, adam

Hi, as it says, I'm looking for a Specialized Avatar 143 or 155 saddle if anyone has one they want to get rid of.

Thanks

Hi

On the off chance that anyone needs to lock two bikes up and their current lock isn't big enough, I'd like to have a smaller version of the attached - basically then I want to swap this for a smaller D lock of the same kind of strength.

The photo shows but it's really one of the biggest Kryptonite and weighs quite a bit, probably good for leaving at work/locking 2 bikes at home.

Cheers.

Bump, price drop, now 150 your choice of mudguard colour!

Bit of a mixed bag here. All in fully working condition.

Dibs then pm. I realise not being in London isn't going to help this sale and postage costs are now a bit silly, especially to make selling these small bits worthwhile but you never know. Prices are shown as item + postage though pick-up from cambridge is fine if you are here on the off chance...

See photo below, also selling a security wall ring with screws on a separate thread:http://www.lfgss.com/thread105457.html

And a folding fixie Raleigh 20 Stowaway: http://www.lfgss.com/thread105450.html

Clock-wise in the first photo, from top.

Old style chainguard: 4+3
Promax handlebars, plenty of tape gum on them. 44cm wide, 25mm at stem grip: 5+5
No name cheapo triple crankset, teeth intact, in fact looks unused, but light surface rust in a couple of places. 48/38/28: 6+4
Deore triple FC-M590 HollowTech II cranks (175mm) with XT Bottom bracket, v. good but heel rub to cranks: 30+5
Cross-top lever, left but fairly plain so upside down on right wouldn't look ridiculous. "Collar" holding it to bar is detachable so you don't have to slide it on to bars, it'll clip on, then tighten if that makes sense: 3+2.50
Braze-on down tube cable stops with barrel adjusters. Unused: 5+2.50
Tiagra front double derailleur, 31.8mm, clip on.: 5+2.50
Canti hanger front: 2+2.50.

Hopefully hubs (front and rear) show up here. If not, let me know and I'll try and send them across.

Height-wise I don't know, I'm 6 foot, it works for me, if you want I can have a look to see how far the seatpost would extend. Otherwise there might be more on here, sorry but am a bit ignorant as not the one who built it: http://sheldonbrown.com/raleigh-twenty.html

Bought this from a locksmiths in Hackney not knowing that the flat i was moving to in Cambridge had a garden shed.

Dibs then pm but serious offers only please. Thank you.

It cost me 25 and the quite clever screws with special heads that can't be unscrewed another 3. A drill, a wall you've got a very safe place to lock your bike to.

It's in perfect nick so would gladly sell the whole package for 20pounds if anyone can make use of it. If not I'm sure I won't always have a garden shed.

It's heavy so would rather drop off eg at Kings X tomorrow morning (25/4/13) at about 9.45 (am based in cambridge) or I will be in London again some point in the next 2 weeks or let's halve postage costs and say 22 pounds and that's a fair deal if it happens to be the thing you're looking for. A particular market probably.

And as a bit of internal advertising, I'm also selling a Fixed Raleigh 20 ie the folding kind if you fancy that, far lighter than a Brompton and much more fun here: http://www.lfgss.com/thread105450.html

soldA few notes first of all...

Price drop, now 150! Can now meet around Liverpool St Station at 1pm this Sunday lunch - would love to sell it then

• Only one set of mudguards comes with it at this price but you can choose your colour, the others I will ebay.
  
• This is for sale whole, I'm not splitting
  
• Dibs followed by pms are welcome but I will sell to cash first (paypal gift)
  
• I'm based in Cambridge but will be at Kings X tomorrow morning (25/4/13) at about 9.45 and would love to sell it then for 160 pounds. If you can't make that, that's fine. Send me the cash and either you come to Cambridge whenever's agreeable for you (nice place, river, uni apparently, lots of real ale) or I will be in London again some point in the next 2 weeks
  
• This is for sale whole, I'm not splitting
  
  
  

What else?
I bought it off a very nice bloke (he did the conversion so respect to doglog) from the CTC forum about 2 months ago and have used it once as was going to be working in London 1/2 times a week and that's changed and am now marooned in the fens.
He had the wheels made by Arup.
Sugino chainset.
A scuffed and scraped but still functional sella San Marco
I bought a quick release seat clamp so could make it a bit smaller for taking inside pubs and such but have never put it on, at the moment it has a nice faux wood effect thing that takes an allen key.

Anything else, please ask. Think the price is decent but if you don't, please say it in a way that doesn't subcontract your dignity to a server in Ohio. Thanks.

Thank you all for the good leads, cosmetically challenged or otherwise.

I will close the thread for a bit as late last night I couldn't get the quill adapter in far enough (short-ish head tube) so took a saw to cut off an inch. Need to see if this is going to work before I get back to anyone.

Thank you, thank you, thank you.

Hi

I have an older frame that needs a bit of height on the front so I'm looking for either an up-angled quill stem (22.2mm) or, as I have a quill adapter, a clamp on stem 25.4mm for regular ie non-oversize handlebars that is short but has a lot of angle to it.

Silver if at all possible.

Many thanks