Search results for:

Id rather not post outside the uk, but let me get back to you if there are no takers for collection : )

40cm mate

Dibs then Pm Please

Good condition NJS stamped B123 bars, few scratches but nothing major.
£35

Profile Design T2 Wing Bullhorns with Cinelli carbon tape. I bought these at the same time as a pair of drops but got on with the drops better, these are basically brand spanking new, used only twice.
£40

Pick up from E2 or SE1

pm'd

Can't stretch that far I'm afraid mate

I've got 500 bones with your name on em for the frame.2nd dibs

That's my main qualm with the leader, front clearance is big! I'm going to be using it on street and also riding herne hill this summer, so I'm guessing from the comments the Dolan would be more suited yes?

I'll check out those forks, cheers!

My trusty Harry Hall is slipping into retirement as a pub bike so looking to build up an alu frame this summer. Debating either a leader 725, or a dolan pre cursor.
With forks the leader is a good £160(with the standard forks) more. Anyone think it's worth the extra dollar?
Thanks in advance

Has the sugino messenger gone yet? If not can meet today

interested in the Biondi for the mrs. Have you got any pics of it built up? OAr just let me know how tight the rear clearance is. ta!

Yeh i have a kryptonite mini, which it pretty hard to get to fit through the back wheel, i normally have a separate lock for that purpose, but the day it got stolen i didnt have it with me. I lock it up in the same place everyday so for all i know they have been watching it for a while. sucks big time

OOPS, Thanks for that

Stolen wheels, please help!!!

Is there a stolen bike tread? if so let me know, but here are the details. Unfortunately i had both of my wheels stolen off my harry hall this morning from outside YCN on rivington st in shoreditch, around 9:30am.

The rear was a matt black b43, silver spokes laced to a silver BLB track hub. Gum wall panasonic tyre and a continental inner tube (yellow valve cap)

The front was a black campagnolo rim (machined braking surface) silver spokes laced to a silver miche track hub. Also on panasonic gum wall tyre.

If anyone see's these or comes across them on ebay/gum tree/brick lane market etc please contact me on mikelythgoe@hotmail.com or 07891174690. I have filed a police report and really want to catch the bastards!!!
cheers

mike

Picture is a bit grainy but you get the idea

Cheers guys, ill post in there

Is there a stolen bike tread? if so let me know, but here are the details. Unfortunately i had both of my wheels stolen off my harry hall this morning from outside YCN on rivington st in shoreditch, around 9:30am.

The rear was a matt black b43, silver spokes laced to a silver BLB track hub. Gum wall panasonic tyre and a continental inner tube (yellow valve cap)

The front was a black campagnolo rim (machined braking surface) silver spokes laced to a silver miche track hub. Also on panasonic gum wall tyre.

If anyone see's these or comes across them on ebay/gum tree/brick lane market etc please contact me on mikelythgoe@hotmail.com or 07891174690. I have filed a police report and really want to catch the bastards!!!
cheers

mike

Picture is a bit grainy but you get the idea

***price drop on the frame***

          ******£125*******

If anyone just wants the frame, ill take £150

Id prefer to sell the frame with the wheel, but if it doesn't sell/someone wants just the frame ill get back to you Thaippines

/Rory O'brien tt low pro frame and 650 front campagnolo shamal

£195 OBO.

I listed just the frame on here 3 weeks ago for £160,but didnt get any takers. Im now listing it with the front campagnolo shamal as well as a spare new and unused tub for £195 . The wheel runs straight and true, the braking surface is a little worn.
Beautiful Rory O'Brien Low Profile time-trial frame, fork, campagnolo headset, and campag bottom bracket and alloy seatpost. Other parts on the bike are not included.

British hand built - From the late eighties
Lightweight Reynolds 753 Steel Tubing

Everest BB Shell

Metallic Purple to Yellow Paintwork

There is a bit of rust around the cable holes as well as general wear, a few scratches here and there but nothing major, as expected from a frame of this age. Seat post seems to be jammed, but haven't tried WD40 etc, it has only been a few months since i changed the post so im sure it will pop out with some elbow grease.

Small blemish to paintwork where the front derailleur was fitted (Cannot be seen anyway when front derailleur is fitted) small 8mm chip in rear chain stay.

Frame Sizing: 590mm Seat-tube (Centre-to-top) / 550mm Top-tube (Centre-to-centre) / Frame was custom built for5'11'' rider

British BB threading / For 27.2mm Seatpost / 1" threaded steerer for quill stems / 130mm rear spacing / 100mm front spacing / Two sets of bottle bosses

Paper thin clearance at the rear

Rory O'Brien had two well known shops in the Romford/East London Area, his frames are well renowned for being quality and were apprently built in nearby Dagenham, Greater London.

This would make an awesome retro time trial project

Pick up from dalston

Selling due to new bike

Here is a pic so you can get a peep at what it looks like totally built up

Its not listed anymore, the auction ended earlier this eve, 40 watchers, no takers.

Beautiful Rory O'Brien Low Profile time-trial frame, fork, campagnolo headset, and campag bottom bracket and alloy seatpost. Other parts on the bike are not included.

£160

Bought this frame from james that has the bike shop down by the canal,
British hand built - From the late eighties
Lightweight Reynolds 753 Steel Tubing

Everest BB Shell

Metallic Purple to Yellow Paintwork

Dents, there is a bit of rust around the cable holes as well as general wear, a few scratches here and there but nothing major, as expected from a frame of this age. Seat post seems to be jammed, but haven't tried WD40 etc, it has only been a few months since i changed the post so im sure it will pop out with some elbow grease.

Small blemish to paintwork where the front derailleur was fitted (Cannot be seen anyway when front derailleur is fitted) small 8mm chip in rear chain stay.

Frame Sizing: 590mm Seat-tube (Centre-to-top) / 550mm Top-tube (Centre-to-centre) / Frame was custom built for5'11'' rider

British BB threading / For 27.2mm Seatpost / 1" threaded steerer for quill stems / 130mm rear spacing / 100mm front spacing / Two sets of bottle bosses

Paper thin clearance at the rear

Designed for 650c Front Wheel / 700c Rear Wheel (Wheels pictured are NOT included in auction)

Rory O'Brien had two well known shops in the Romford/East London Area, his frames are well renowned for being quality and were apprently built in nearby Dagenham, Greater London.

This would make an awesome retro time trial project

Selling due to new bike

Pick up from dalston in the evening or shoreditch during the day, im away this weekend, but bike can be picked from monday

First picture is of the frame built up, next three pics are of the blemishes,

http://img831.imageshack.us/i/picture2etx.png/

http://img152.imageshack.us/i/picture3rr.png/

http://img97.imageshack.us/i/picture5gm.png/

http://img824.imageshack.us/i/picture4mi.png/

NICE ONE,cheers mate

Im trying to source a non quick release skewer for my front campagnolo shamal. Anyone have any ideas where I could find one or if you know any other brand that I could use, please let me know. The guy at blb said it had to be a campy one, true?
cheers!