-
-
-
-
-
whats measurements and spoke lengths have you used?
264mm I was given this by BLB, Fitzrovia and the sapim spoke calc
Make sure you've done over-over-under correctly - the first spoke that you cross is generally very close to the hub so you might not notice that you've already gone over one.
I've checked all the over-over-unders and they all seem to be fine.
-
You don't do all of one side first and then the other, you generally do the leading spokes first and then twist the hub and do the trailing spokes.
I'd suggest spending a few quid on the Roger Musson ebook at www.wheelpro.co.uk and learning to do it properly.
That is what i did, I followed Sheldon Brown's wheel build http://sheldonbrown.com/wheelbuild.html so I dont know what I did wrong :s
-
Right I've got myself a 36h h plus son eero rim and a system ex flip flop track hum.
This is my first wheel build and I've messed it up a couple of times now already.
I've laced one side with 3 cross properly, I think, and I've flipped it over to do the leading spokes on the other side and the spokes don't seem to reach the holes.
I've tried loosening all the other spokes but its still not reaching.
Can anyone shed any light?
I can supply pictures if they would help you help me.
Thanks
-
-
-
-
-
-
-
-
-
-
-
-
-
Keep reading from the results. No skimming now.
One of the results links to this forum where one was sold for 500 squid.
http://www.lfgss.com/thread59473.htmlValue is going to vary depending on what level it is, condition it's in, etc.
I saw that, there is two results that come up from here, both to do with that bike. I was looking for any history on the bikes and a couple of price's so I could get an average estimation. It's in near mint condition, I'll post some pictures up when I receive them if that would help?
-
-


What time are visiting hours and when is nap time?