Search results for:

https://www.planetx.co.uk/i/q/BSCARBSFB/campagnolo-record-brake-shoe-fixing-bolt#BSCARBSFB

Slightly different but might work.

Sorted from planet x.

This type as pictured, which are used on some 11 speed carbon chainsets. Any number considered.

Thanks.

Cassette sold.

Sold to the first person, thanks for the interest.

Closed, listing elsewhere.

pms replied to

Now sold.

Rear wheel was originally bought from this parish as a pair, but the front rim was toast. A replacement wheel was sourced, so..

Not a matching pair but both 50mm. Front unknown rim and hub, smooth, little wear to brake track and true. Rear unknown rim on hope mono rs hub. Very loud freehub which you will either love or hate, but can be quietened down a bit with more grease. Fitted with 11 speed campagnolo freehub - (an 11 speed campag cassette will work perfectly with shimano / sram set ups). Smooth and true and also with little wear to track. Some marks from use but nothing major. External rim widths are approx 23mm and these tyres measure up to about 26.5mm across.

Tyres and tubes are included and are well worn but useable vittoria corsa sc, 25mm. Also included is a 10 speed shimano freehub, a 20H hope mono rs front hub + the spokes that it came with, some carbon brake pads, skewers and a spare vittoria tyre.

£175 posted as I am in Birmingham

Now sold.

Campagnolo Zonda wheels, I bought these wheels around 6 years ago but they have covered less than 1000km as I switched to carbon wheels and some cheap fulcrum 5's for winter.They have been de-stickered and are in excellent condition, zero wear to brake track and bearings good as new. They come with unmarked original skewers and have a campag freehub.

Weights for the bare wheels are 658g front, 869g rear.

Please note, with an 11 speed campagnolo cassette fitted, these will work perfectly with shimano / sram 11 speed set ups.

£145 pick up in Birmingham, £12 to send using Evri (hermes)

Ignore, sorry

Hayes cycles in Wall Heath? Will there be any road framesets going?

I have a set of arms, 170mm but non matching. Ultra torque carbon obviously, the drive side is record, non drive side is chorus (could be vice versa, need to check)

Let me know if you are interested and I can provide more details & pics.

Readers. Swapped groupset to record 11 over the winter. Couple of other small changes too.

Very good price with the DA groupset.

pm sent

Good price, I would have this if I was in London.

Mavic open pro rim on Ultegra HB6500 hub. 32h anodized blue rim built with single butted stainless spokes. Some wear to braking surface but tons of life left. Bearings excellent and true to within 1mm. Fitted with a good condition 23mm gator skin tyre and an Ultegra skewer. £30

Mavic SUP grey anodized 32h rim on Campagnolo Chorus 9 speed hub. Built by G.Proud of Kendell cycles, rim in good condition, true to within about 1mm. Small ding on edge of rim (too small to picture & cannot be felt in use). 9 speed chorus hub, can also take 10 & 11 speed cassettes. Bearings good, comes with proprietary lock ring which is quite rare, slightly smaller thread diameter than modern campag lock rings. Comes with a decent Vittoria open corsa tyre and a skewer. £40

Beater Mavic cosmos in silver. Wheel is true & bearings good but rim is quite worn. Comes with a well used Vittoria open corsa tyre. £20

Pair of Mavic cosmos wheels in black, 24/28h. In decent condition, not much wear to rims and bearings good. Front is true, rear has a slight wobble, I'm sure somebody with the relevant skills could get it perfect. Shimano up to 11spd freehub. Come with 24mm Vittoria diamante pro radiale tyres & skewers. £45

£120 for all 5 wheels.
Cannot post any of these wheels so collection only from Solihull B92.

As title, thanks.

Mint CAAD3 saeco for sale on retrobike

https://www.retrobike.co.uk/threads/cannondale-caad3-2000-saeco-dura-ace-%C2%A3650.439502/

Tarty anodised lock ring wanted for a campagnolo cassette with a 12t smallest cog.

Black prefered, other colours considered. Could also swap a new one with a brand new regular campagnolo lock ring.

Thanks.

Been dragging my heels on this one a bit, but now finished. Mainly original but with some parts bin bits. Cranks are Suntour originally off my 93 GT borrego, which I had anodised in 95, when that was the thing to do, but a good match for this tequesta.

Kudos to Pierre for the bar tape and cabling job. This is a good video of how the pros do it.

https://www.youtube.com/watch?v=jGdPNEllITg&ab_channel=TinkoffTeam

Billy bonkers back in stock at Merlin now.

Excellent price for the groupset. I would have bought it already if I was in London.

Lovely that!

New project, 1992 gt tequesta. My first proper mountain bike was a 93 gt borrego, so was looking for something from that era with the splatter paint. This one started life at Martyn Ashfield cycles in Wales, spent some time in Switzerland as witnessed by a service sticker on the frame, and is now with me in the midlands. Mother of all jobs to get the fairly stuck bottom bracket out but all good now. Going for some wide billy bonkers tyres, possibly on the original araya rims, but not yet decided how to build it up drivetrain wise.