Search results for:

Thanks for all the interest, the Brian Rourke frame has not sold.

If any one is looking for a good quality small steel frame / bike drop me a PM as there are a few left.

Just hung the frame and forks with headset on the digital scales which are reasonable accurate and it weighs 2327 grammes which compares favourably with the same size of Donohue track frame in 853 tubing which comes in at 2618 grammes.

This might be what your looking for , could be built in to a bike to your specification :

https://www.lfgss.com/conversations/302107/#comment13534146

Regards Allister

Now surplus to requirements,
Brian Rourke track frame in Reynolds 653 Tubing.

The frame sizes are 48 cm seat tube Centre To Centre and 48 cm top tube CTC

Standard size 110 mm front and 120mm rear end spacing. British threaded bracket shell and 27.2mm seat pin size

The frame has a Campagnolo Athena Alloy 1" threaded head set fitted , this is not included in the sale

The images are out of the camera with just an exposure optimisation . The frame has not been cleaned or polished . The chrome plated front and rear ends and right hand chain stay are in good condition with some marking to the ends where the wheel nuts have been , there is no pitting or rust on the chrome .

They have no dents but a bit of wear and fair use marks to the paint as can be seen on the photo’s.
The black marks are mastic sealant which comes off fairly easily with a wee dab of petrol

The frame and forks are £ 265 delivered in the UK

PM me if you need any more info.

We had some one off skins suits done by the German firm Owayo .

Really sharp on the ball customer service delivered to a very tight deadline and fairly good quality .

https://www.owayo.co.uk/en/cycling.htm

Hope that helps .

Don't know if your cyber bullying has worked or not but thats the frame sold subject to the usual formalities.

Thanks for all the Interest

I will be posting up some other classic steel track frames in the next week or so if you are looking for a small Reynolds 531, 653 or 851 frames keep checking !

Allister

Not sure why this is still here after 1.5K views !

Perhaps it's too expensive with the postage or folk would prefer it to have a headset fitted ?

Either way its now £250 posted in the UK or collected with a Tange Chrome headset fitted ( Like a Campag Record copy rather than a cheap modern pattern one .

Pm me for more information if needed .

Good question , I guess it depends what your "all in " specification is , do you want tubular wheels or clinchers , Gaitorskins or Pista EVO's, LF Campag record hubs or LF sheriff stars, Campag 151 BCD cranks or 10mm Dura Ace transmission ?

Drop me a PM to check your options .

For the folk who have pm'd as this may be of interest to others :
Just to clarify , the frame has no headset fitted. There are a number of period 1" headsets from Campagnolo, Tange, and Shimano that can be fitted at the buyers request.

The frame can be made up with a Period specific Campagnolo Pista group set or Dura Ace, either 1/2" transmission or 10mm, Cinelli Bars / Stem and Turbo saddle if required.

PM me for more info .

Open to accepting a deposit and holding for a while ... !

Evening ,
I have some :
Super Record Pista cranks in 165mm / 144BCD
Record Pista cranks in 165mm / 151 BCD
both with a variety of rings
Large Flange Record Pista Hubs in a variety of drillings
Grand Sport Headsets
Record twin bolt seat pins .

PM me with your specific requirements

Allister

Apologies for the delay and one snap at a time ,

The work porn filter is no longer preventing uploads , so here are all the pics and a reminder of the specification :

Woodrup Track frame 56cm square

The frame is a mid 80's 531 C Woodrup track frame with campagnolo track ends and half chrome forks and stays. As was the fashion of the day it has close clearances, with 56cm top tube and 56cm seat tube with 28cm bracket height with EVO pista tyres .

This is the condition right out of the store, the snaps are under low energy bulbs so the colour is a little towards the yellow side. The chrome has some superficial pitting, there are no dents or dings on any of the tubes.

It would look significantly better with a light T cut and wax along with the chrome buffed up with some autosolvol polish and waxed.

It has a British threaded bracket and 27.7mm seat pin size and standard headset size with British threaded forks . There are no issues with seat pin / bracket / headset fittings.
Unusually, the front forks are centre drilled for a brake .

£ 265 posted in the UK / EU

PM me for more info.

Looks like this is going to be coming one snap at a time ....

The filters seem to think it has flesh tones :-(

Thats pretty rubbish !

Seems to be issues with the photo upload, if you pm me your email I will get the frame snaps to you while I try and sort this out from a work PC :-(

Regards Allister

Woodrup Track frame 56cm square

The frame is a mid 80's 531 C Woodrup track frame with campagnolo track ends and half chrome forks and stays. As was the fashion of the day it has close clearances, with 56cm top tube and 56cm seat tube with 28cm bracket height with EVO pista tyres .

This is the condition right out of the store, the snaps are under low energy bulbs so the colour is a little towards the yellow side. The chrome has some superficial pitting, there are no dents or dings on any of the tubes.

It would look significantly better with a light T cut and wax along with the chrome buffed up with some autosolvol polish and waxed.

It has a British threaded bracket and 27.7mm seat pin size and standard headset size with British threaded forks . There are no issues with seat pin / bracket / headset fittings.
Unusually, the front forks are centre drilled for a brake .

£ 265 posted in the UK / EU

PM me for more info.

I see there is one on an auction site too :

http://www.ebay.co.uk/itm/MAVIC-631-STARFISH-39-52-CHAINSET-170mm-/391709541696?_trksid=p2141725.m3641.l6368

Mixed news I am afraid, I have located the drive side crank.

Its a Mavic 631 in 170mm lenth and 130mm BCD in sound mechanical and fair cosmetic condition.
The pictures are from the camera with out and of the dust or grime being polished off the alloy so you can see what its like. I think it will polish up fairly well .

I cannot find the left hand crank and from my hazy memory I think there was an issue with the pedal threads so it may have been scrapped.

If this is the component you are looking for, I am happy to ship it at cost world wide.

I have no idea of the value to you so PM me about a contribution to our cycle team's slush fund !

PS, I have the matching "Diablo " track hubs in 24 hole drilling, in much better condition if they are of interest .

Regards Allister

I think I have one in the parts box, I will have a look tomorrow .

Regards Allister

I will shortly be disposing of some small track bikes that kids have outgrown.

They are steel Reynolds 651 tubing Paul Donohue frames with Miche Pista groupset with 650C wheels the smaller 38cm bikes have 155mm cranks .

PM if interested in more details .

I have a lovely SRAM 144 BCD light grey 1/8 unused, they are very round , which is not always the case £23 posted in the UK .

Omniums on a Precursa has to really be a labour of love with all sorts of jiggery pokery bracket spacers and some "depressions" on the chain stays .

Having tried it a few times now my view is its not worth the trouble, just use SG75's or DA cranks if you think you will notice any difference over the Sugino messengers or Miche Advanced .

if your looking to buy a 54cm Precursa drop me a pm I have a few surplus ones for disposal .

Regards Allister

How tall are you ?

Snaps to show the amount of seatpin showing with scale added to the previous post .

Allister

Drop me a PM ......

How tall are you ?

Its a good question, to gauge the amount of post that is out in the picture this only really works if the bike is correctly set up for me to ride it and even then its a guess.

I am 4'11" if that helps, but I will go to the bike store tomorrow and measure the amount of seat pin showing for you .

Just checked the Avanti bike this afternoon and the amount of seat pin showing from the top of the seat tube to the saddle rail clamp is 25cm and the saddle top to centre of the BB is 83cm

Regards Allister

Still available, I am a dwarf but I don't ride this bike so that's probably not relevant . How tall are you ?