Search results for:

Nitto Dynamic quill stem, for 26.0 mm bars and 1" steerer. 110 mm version.

18 months old, has only ever had one set of bars in it, bolts and threads are perfect, grease applied from new.

There are marks to the lacquer where it has been in the steerer, as you'd expect, but as I have had the stem set relatively high fortunately these very slight marks begin less than 10 mm above the minimum insertion point.

No marks at all on the horizontal part of the stem or on the clamp. Very nicely finished - same finish as a Pearl.

Note that this is a Dynamic, not the Dynamic Mk11, see about 2/3rds of the way down this page:

http://www.velosolo.co.uk/shopbar.html

Here's a 120 mm one:

Revised price: £25 including UK post

So, I got a pair of 8 mm MKS tugs. I thought it seemed very bulky on the track end in terms of width. In any case, the size meant that it interfered with the Phil Wood dome I have on there so I sold them on.

I then got a 5 mm MKs tug which fits perfectly well (BJ Vigorelli) and leaves room for the Dome (I know that with a tug the domes should not be needed - I might revert back to normal Phil Wood washers). This tug works really well and has already helped make the bike more the low-maintenance machine that I had hoped for.

Anyhoo - my problem is this. Does the washer part of the tug go inside or outside the dropout? The leaflet that came with the tugs (in Japanese) has diagrams that do not provide clues. Searching on here doesn't give any clear answers.
Advice appreciated: in or out?

I see that the thin MKS chaintug fits track ends up to 5 mm, according to Hujub. Is that an accurate upper limit? I measure my Bob Jackson's at 5.3 mm ish. The fat ones look a bit more bulky than I'd like.

Not that I like tugs much in any case, but just occasionally my wheel moves fractionally, no matter what I do.

Cropicana, I'm unlikely to get much opportunity for a meet-up / collect in the near future I'm afraid. Paypal / post preferred.

Wicksie / b'jammin: looks as if you both need one each? Happy to split. If you confirm via PM I'll reply with paypal email etc.

Thanks.

Bought these very recently - they do not work with my current set-up hence the sale.

The package has been opened, one side has been tried briefly on an axle (but not tightened), the other has not been unpacked, and all the packaging / instruction leaflet is there. As new.

http://www.sjscycles.co.uk/mks-ca-njs-chain-tug-prod21950/

Note that this is the 8 mm version with the Allen key fitting.

**

NOW SOLD
**

I see that the thin MKS chaintug fits track ends up to 5 mm, according to Hujub. Is that an accurate upper limit? I measure my Bob Jackson's at 5.3 mm ish. The fat ones look a bit more bulky than I'd like.

Not that I like tugs much in any case, but just occasionally my wheel moves fractionally, no matter what I do.

What happens in a tail-wind?

Walk backwards?

drool

Think I might have to give that a perfect 10. Enjoy!

Computer is Blackburn Delphi 4.0.
My forks are triangular in shape,the flat being on the inside,due to the outer shape it is difficult getting the angle correct

A quick Google image search seems to show that it is a fairly conventional attachment. It can be a bit fiddly on some forks, granted, but there'll be a way. At worst you'll need to make a little padded piece out of e.g. plastazote to augment the supplied fittings.

Wireless: often a PITA. The only one I've found to be reliable is the Cateye Strada. Shit bracket though unless it stays on one bike all the time. Good luck with the Delphi.

Which computer is it?

Can the sender unit not be rotated around in such a way as to give enough clearance? The other way is to move it up or down the fork.

Speaking of brolly, can anyone direct me to a decent one?

http://www.senzumbrellas.com/en/home/

Cheers. I always love PeterWhites website. So informative. Quite tempted by the the SQR Slim

Yes, great site. Ben's cycles and Rene Herse also good for tasty items but not so informative.

I didn't really consider the SQRs as I was after a set-up that didn't have any clamps on the seatpost, but aside from that aspect I have a suspicion that they slap your legs as you pedal. Which would irritate the hell out of me.

Sergeant Pluck - What's the saddle bag on the BJ?

It's a "Super C Barley" by Carradice. Not a stock item, they make them for Peter White cycles in the USA, but if you give Carradice a ring they'll do one for you the next time they do a run. Same as a Barley but with webbing straps and plastic QR snap buckle things which I prefer to the usual leather straps.

My Bob Jackson - more or less a new drivetrain, as I couldn't resolve the chainstay clearance problem with the previous cranks, at least not when a 42 mm chainline is needed:

My recently completed Joe Waugh track frame, complete with flouro 80's fade bartape

Tidy :)

number6: Looks really good, great project.

Lovely Mercian Vigorelli a page or 2 back too.

Cheers both. Now to locate a pair at a not-too-painful price.

Agree with edscoble. It's arguable that horizontal forward facing dropouts, as in the Tempo, are handier overall for a road bike compared to track ends. Less adjusting of the rear brakes needed when flipping to a different sprocket, for instance, because the dropouts are roughly parallel to the movement of the rim at the brakes.

Thanks for the reply.

Yes, appreciate that the thread is 22 mm most of the time, no problem with that aspect, but I was thinking more of the depth or clearance over the bolt heads. Perhaps some dust caps might not clear the bolts if they were meant for cranks that use a Allen key bolts.

considering that the thread is always the same diameter/pitch (apart from old TA or Stronglight), on't see why any dust cap won't screw in :)

Cracking shot!

Legend

Hi all. For the current Record Pista cranks (14 mm hex bolt), can I only use the Allen key dust caps (marked Campag Made in Italy)? Or is it possible to use the ones that take a pin spanner?

The tyre is a 23-622 or 700-32C and the rim is 700C. At 80PSI (at the lower range) the bead still shouldnt slip off

And is the rim suited to 32C tyres? Just checking - not familiar with those rims.

No, 80 psi is not going to blow the tyre off but I was thinking that too low a pressure might allow too much movement of the tyre when riding.

Apologies if I've missed this info, but what are the dimensions of the rim and the tyre? As well as the max pressure, is there a minimum quoted? 80 is fairly low for what I assume is a 23 or so tyre.

As per previous posts, put some air in the tube before putting it in. Helps the tube get located properly well up in the tyre. Take care with the valve stem and make sure you push it up so that the tube is not trapped under the bead. Fit tyre (best to avoid levers, almost always possible to do by hand), put some more air in, go round each side of the tyre and do a sort of push-pull-lift to ensure the tyre is well seated.
Then inflate.

Folding tyres have a kevlar or similar flexible bead. Non-folders use wire. Both are clinchers.

At last I have a set-up that I can be pleased to add to this:

Campagnolo Record Pista + Campag Record Pista 111 mm + Phil + Phil = Sergeant Pluck

Campagnolo:
Campagnolo Pista + Campag Record Pista + Royce + EAI = kowalski
Campagnolo Pista + Campag Record 111mm (80's) + Phil + Phil = tristoo
Campagnolo Pista + Campag Centaur 111mm + Phil Hub + Phil Cog = Sparky's Fuji
Campagnolo Pista + Campag Centaur 111mm + Suzue Promax SB + EAI superstar = oddsock
Campagnolo Pista + Campag Athena + Phils (Hub and cog) (+ Fizik bar tape) = Jonny
Campagnolo Pista + Campag Pista + Campag Pista = Platini
Campagnolo Pista + Campag Record + Royce + eai = briankwan
Campagnolo Pista '81 + Campag 109 + Record LF hubs+ Phil cog = Skully
Campagnolo Pista + Campag + Ambrosio + Phil Wood = Sano
Campagnolo Pista + Specialities TA + Phil Wood + Phil Wood = VelocityBoy
Campagnolo Pista + Campag + Araya + Phil Wood = 50/14
Campagnolo PIsta + Campag Veloce 111mm + System-EX + Condor = hladik
Campag Record Pista - Campag Centaur 111mm - Campag Record Pista - Phil Wood - the-smiling-buddha
Campag Record Pista + Record pista + Record Pista + Dura ace = gizmond
Campag Record Pista + Token tiramic 111mm + Ambrosio + Phil Wood + VO sewn-on elkhide= Smallfurry (BB asymmetric, buggerit)
Campag Record Pista + Phil Wood BRS10S 110.5 + Phil Wood + EAI = Jonesy
Campag Record Pista + Campag Centaur 111mm + Dura Ace Hb7600 + Dura Ace = Cornelius Blackfoot
Campagnolo Record Pista+Campagnolo Centaur 111mm+Miche Primato+Condor CNC=Cosmonaut
Campagnolo Record Pista+Stronglight 110 ISO+Campag Record Road screw on with large spacer swapped from DS to NDS+Trialtech Sport=Mitre_Tester
Campagnolo Record Pista + Campag Centaur 111mm + Royce + On-One (& others) = BMMF
Campagnolo Record + miche 111mm + Mack + Phil Wood = drøn
Campagnolo Pista + Campag Record Pista + Campag Record Pista + EAI = entwidomela
Campagnolo Record Pista + Campag Record Pista 111 mm + Phil Wood + Phil Wood = Sergeant Pluck
Campagnolo Strada + Campag Centaur 111mm + Campag Record Pista + Tranzmission = upstart
Campag Super Record Pista + Record Pista + Dura Ace 7600 HF + Condor = M-X
Campagnolo Record Pista + Campagnolo Centaur 111mm + Formula + Phil Wood = arantrek
Campag Record Pista +Campag Centuar 111m + On One + Condor = Sainsburys Ed
Campag C Record Pista + Campag Veloce 115mm (needed, tight Q-factor and fat stays, bit out but still works) + Phil + Phil = maxcrowe
Campagnolo Super Record + Campagnolo Veloce 115mm + Miche Primato + EAI = crispin_glover

Dotek:
Dotek cheapy + Campag Mirage + Formula + Dura-Ace = fc9k
Dotek FG-PRO6-170 + BBUN26 68x113mm + OnOne small flange double fixed hub + Miche1/8sprocket = xroads (42mm chainline with chainring on inner side of spider, chainguard on outer side)

Dura-Ace:

Dura-Ace + Sugino 75 + Phil Wood + EAI = hassanr
Dura-Ace 7600 + Sugino 75 + Dura Ace + Surly = Dayno
Dura-Ace + UN72/110mm + Goldtec + EAI Superstar = Object
Dura-Ace + UN53/107mm + Dura Ace+Dura Ace= MA3K
Dura-Ace + UN54/107mm + Dura Ace + Phil = Shinscar
Dura-Ace + Dura-Ace BB-7610 + Dura-Ace 7600 + EAI = flickwg
Dura-Ace 7600 + UN54/107mm + Novatec + some shit = Ant
Dura-Ace FC7710 + Dura Ace BB7710 (109.5) + Dura Ace HB7600 + Dura Ace 1/8 = RPM dura-fuckin-ace.
Dura-Ace all the way baby... = dovoneil
Dura-Ace FC7710 + Dura Ace BB7710 + Dura Ace HB7600 + EAI = town
Dura-Ace Old school 151 + UN54+ Sys Ex + On One= Eyebrows perfect (dangermouse)
Dura-Ace + UN54 110 + Dura-Ace + Dura-Ace = Charco
Dura-Ace + Stronglight JP400 + Phil + Andel = euan
Dura-Ace 7710 + Sugino 75 chainring + Dura-Ace 7700 109.5mm BB + Dura-Ace 7600 hub + Sugino Sprocket = Dammit
Dura Ace 7710 + Shimano 105 109.5mm + suzue pro max + condor = liquidsky59
Dura Ace 7600 + Campag Veloce 115.5 + Level (45mm chainline) = M-X
Dura Ace 7600 + Dura Ace 7610 (109mm) + Royce + EAI = wools
Dura Ace 7600 + Campagnolo Pista 111mm + Phil Wood + Phil Wood = maxcrowe

Miche:

Miche Primato + Campagnolo 111mm + Miche hub + EAI = Well, is it.
Miche + Miche +Miche + Andel + Miche = fixedfreak (max)
Miche + Campag Record 111mm + Goldtec + EAI = MrSmith
Miche + campag centaur 111mm + formula + surly (~fred)
Miche + Miche + Velosteel coaster = gizmond
Miche + Campag Record 109mm + Phil + Phil = gizmond
Miche + Miche + Navigator Pista + EAI = gizmond also
Miche + Sugino + Miche + EAI = Shinscar (surly)
Miche Primato Pista + Shimano UN54/110mm + Formula + Dura Ace = CHUG_IT
Miche Primato Pista + Miche 107mm + On-One + EAI = ummar01
Miche Primato Pista + Campag Centaur 111mm + Formula + EAI = ummar01
Miche (Condor-branded) + Miche 107mm (cups adjusted 2mm towards drivechain) + Goldtec + EAI 1/8" = eeehhhh {46mm chainline}
Miche Primato Advanced + Miche 107mm + Goldtec + Condor = Buddha Fingaz
Miche Primato Advanced + Miche 107mm + Miche + Miche = Buddha Fingaz
Miche Primato Advanced + Miche 107mm + Condor(IRO) + Surly = edscoble
Miche Primato Advanced + Miche + Miche + Miche = Hovis Brown
Miche Primato Advanced + Miche + Miche + Miche Pista = 50/14
Miche Primato Advanced + Shimano UN53/107mm + Condor Goldtec + EAI = hamster
Miche Primato Advanced + Miche 107mm + Mavic 520 Piste + Roselli = entwidomela
Miche Primato Advanced + Campagnolo Veloce 111mm + Miche + Surly(+ 1mm spacer) = oge
Miche Advanced + Miche + Gran Compe + DA = VED
Miche Advanced + Miche + phil wood + DA = VED
Miche Primato Advanced + miche 107 + Halo + EAI = philxthomas
Miche Advanced + Miche + Dia Compe Grand Compe + EAI = gizmond
Miche Advanced + Campagnolo Athena adjustable 111mm + Dia Compe Gran Compe + Miche Primato = a|s (although my driveside chainstay is out of whack by 5mm or so)
Miche Primato Advanced + fyxomantosis chainring 49t + royce titanium + phil wood 16t + fizik = germanmarc
Miche Primato Advanced + Miche 107mm + system ex + Andel = sorethroat
Miche Primato Advanced + Miche 107mm + zenith/formula/systemex + velo solo = velo libre
Miche Primato Advanced + Shimano Un54 + GoldTec + EAI = Clockwork_Killa

Stronglight:

Stronglight + UN53/107mm + Sys-X + Formula= MA3K
Stronglight + Shimano UN73/110mm + SystemEx + EAI -2mm = mr_tom
Stronglight + Stronglight + SystemEx + Tranzmission = BringMeMyFix
Stronglight + UN72/107mm + Miche + EAI = Richard Cheese (all 3/32)
Stronglight + Shitmano UN54/118mm + Goldtec + Surly/EAI (on 130mm dropouts for 50mm chainline, Pomino, Genesis singlespeed etc..)= RPM
Stronglight + Sugino / 103mm + Phil Wood + Phil Wood 1/8" = Superprecise
Stronglight 2000 + Stronglight JP400 / 107mm JIS + Phil Wood + Phil Wood 1/8" (42mm chainline) = Spiny
Stronglight 2000 + Stronglight JP400 / 107mm JIS + Goldtec + Condor = lightindustrialunit
Stronglight 49a (vintage) + 49t Williams chainring (vintage) + VP Components BV-55P 127.5mm + Surly new + surly 19t = mc_nebula

Sugino 75:

Sugino 75 + Miche + Condor (non Goldtec) + Dura Ace = brett
Sugino 75 + Miche + Phil Wood = adoubletap
Sugino 75 + Miche + Phil Wood + Phil Wood = d.mac ( if it ever comes back from Condor....)
Sugino 75 + Miche + Campag + DA = gizmond
Sugino 75 + Phil Wood + Phil Wood + Phil Wood = Cornelius Blackfoot
Sugino 75 + Phil Wood + Phil Wood + Phil Wood = Wapping Warrior
Sugino 75 + Phil Wood 108mm + Phil Wood + Phil Wood = exedanni
Sugino 75 + Phil 110.5mm + Phil + EAI Superstar = Object
Sugino 75 + Phil 110.5mm + Goldtech + Phil Wood = Dancing James
Sugino 75 + Campag Centaur 111mm + Goldtec + Surly = Muleboy
Sugino 75 + Campag Centaur 111mm + Goldtec + EAI = dogsballs
Sugino 75 + Campag Centaur 111mm + Goldtec + EAI= 31t®um
Sugino 75 + Campag Centaur 111mm + Goldtec + EAI = Broker
Sugino 75 + Campag Centaur 111mm + Phil Wood + Phil Wood= adoubletap + fred
Sugino 75 + Campag Centaur 111mm + Phil Wood + Phil Wood= biles
Sugino 75 + Campag Centaur 111mm + Phil Wood + Phil Wood = maxcrowe
Sugino 75 + Campag Centaur 111mm + Phil Wood + Phil Wood = Buddha Fingaz
Sugino 75 + Campag Centaur 111mm + Phil Wood + EAI = mattty
Sugino 75 + Campag Centaur 111mm + Mavic Ellipse + EAI = mattty
Sugino 75 + Campag Centaur 111mm + Suzue Promax + Shimano DX = TheorySwine
Sugino 75 + Campag Veloce 111mm + Phil Wood + EAI = jaygee
Sugino 75 + Campag Veloce 111mm + Formula + Dura Ace = TooTallTim
Sugino 75 + Hatta R9400 + ShimanoHB7600 + EAI superstar cog = Tynan
Sugino 75 + Hatta R9400 + ShimanoHB7600 + Dura-ace= Build
Sugino 75 + Sugino 75 + Phil Wood + EAI = mr_tom
Sugino 75 + Sugino 75 + Phil Wood + Surly = Dannoleeed
Sugino 75 + Dura Ace + Condor Goldtec + Condor CNC = Mouse
Sugino 75 + Shimano + Condor Goldtec + EAI Superstar = Nimhbus
Sugino 75 + Hatta R9400 (109mm) + Campagnolo C.Record + Sugino Gigas = moose76
Sugino 75 + Dura Ace (109mm) + Phil Wood + EAI regular (euro asia imports) = moose76
Sugino 75 + Phil Wood + Phil Wood + Phil Wood = shootthebreeze
Sugino 75 + Sugino 75 + Phil Wood + Phil Wood = works
Sugino 75 + Sugino 75 + Dura Ace + EAI Superstar = jaygee
Sugino 75 + Royce 103mm JIS + Royce + EAI Superstar = welpeur
Sugino 75 + Stronglight + Phil Wood + Dura Ace (+ cut down odyssey grips) = jonny
Sugino 75 + Hatta R9400 (109mm) + Dura Ace + EAI = mikec
Sugino 75 + Campag Centaur 111mm + Goldtec + EAI = jon_a
Sugino 75 + miche 107mm + miche primato + crap 3/32 = Gareth_lindsay
Sugino 75 + Sugino 75 + Mavic Ellipse + Dura Ace = tick.tick.tick
Sugino 75 + Phil Wood + Phil Wood + Phil Wood = dasmiller
Sugino 75 + Hatta R9400 (109mm) +Gran Compe + EAI = MatP

Sugino Messenger/RD:

Sugino Messenger + Sugino 103mm + Phil Wood + EAI = mattty
Sugino Messenger + Phil wood (103 jis) + phil wood + phil wood = chris crash
Sugino Messenger + Shimano + Ambrosio + Condor = Shinscar (clown)
Sugino Messenger + Sugino/103mm + Goldtec + DA = VED (perfect)
Sugino Messenger + Sugino + Hope track + EAI = Aleksi
Sugino Messenger + Shimano + Halo + Shimano dura ace = Ivandaterrible

Sugino Super Mighty + Sugino 109 + Dura Ace + Phil Wood = Dayno
Sugino RD + Sugino + Ambrosio + Miche = asm } both are pretty much spot on
Sugino RD + Sugino/103mm + Sys-X + Dura Ace = MA3K
Sugino RD + Sugino/103mm + SJS (SystemEx et al) + Dura Ace/Andel = ChrisNW {44 front, 42 rear}
Sugino RD + Sugino/103mm + Halo + Halo = Hotwls
Sugino RD + Sugino/103mm + OnOne + OnOne = -=Mike=-
Sugino RD + Sugino/103mm + Surly O.L.D. + Surly/Miche/Dicta = ShannonBall
Sugino RD + Sugino/103mm + OnOne + Dura Ace = Pifko
Sugino RD + Sugino/103mm+ Sys Ex + Miche = Eightball69
Sugino RD + UN53/107mm + Condor Goldtec + EAI= hamster
Sugino RD + Sugino/103mm + Formula track hub +Miche sprocket (Miche lockring will no fit this hub) = gtvlusso
Sugino RD + Sugino/103mm+ Gran Compe + Token/Andel = Balki
Sugino RD + Sugino/103mm + Gran Compe + Velo Solo = Rascal
Sugino RD + Sugino/103mm + Phil Wood + EAI = Rascal
Sugino RD (On inside ring) + Sugino/103mm+ Formula + Surly = entwidomela
Sugino RD + Sugino/103mm + OnOne + Andel = welpeur
Sugino RD (on inside ring) + Shimano UN54 107mm + Goldtec + Condor = Buddha Fingaz
Sugino RD + Shimano UN54 107mm + Formula + Shimano Freewheel (and 2.5mm spacers) = ummar01
Sugino RD-2 - Sugino 103 JIS - Halo - Andel = pissed_up_pistaaaaaaa

Misc.:

Andel + Shimano UN54 110mm + Forumla + EAI = Jaimes
Andel + Tange 110.5 + Formula + Surly = Numeryk
Andel/BLB + Sugino 103mm + zenith/formula + surly = dinosaur
Andel + Shimano UN54 + phil woods + andel = liquidsky59
Campagnolo Double + Shimano + Formula + DA = Tobyprice
Campagnolo Record time trial + FAG Nadax + SJS + Beans Cycles = BlueQuinn
Campagnolo road double (Croce D'Aune) + 111mm ACH + Goldtec + Miche or On One or Surly or EAI 3/32nd = AlexB
Campagnolo road double (Chorus) with chainring inside spider + 107mm Miche Primato (slight offset to NDS) + Halo + BLB or Dura-Ace (frankenstein transmission, but perfect chainline) = upstart
Campagnolo Veloce Double + Campag Veloce + SystemEx = Hovis Brown
Campagnolo Veloce Triple + Campag Veloce + Goldtec + Tranzmission = BringMeMyFix
Campag Veloce UT+Record UT+Mavic Ellipse+Phil Wood/EAI Gold Medal=Mitre_Tester
FSA Carbon Track Pro + FSA Platinum Pro BB + Mack Double Fixed Track Hub + DA Track Cog + KMC Superlight Chain = Dov
FSA Carbon Track Pro (new style) + FSA BB + profile + Miche pro = fred
FSA Vero + 110mm cheapo cartridge + Dura-Ace/SurlyFixer/Shimano LX = N3lson
FSA Vero + Shimano UN54 110mm + System EX + On-One = Buddha Fingaz
FSA Vero+Shimano UN54+Miche Pistard+Deda=east end images
FSA Vero+Gebhardt 1/8 CR+Sugino 103 BB+Formula Hub+Condor Cog = hoonz
FSA Vigorelli + ISIS BB of indeterminate width + Phil + Condor = hippynice
Gipiemme Pista + Campag 111mm + Mavic + Dura-Ace (also Goldtec + Miche) = ondine
Gusset Pygmy 853 (gusset chainwheel) + Gusset Euro bb (145mm spindle) + Goldtec + EAI = hassanr
IRD (Interlock Racing) Defiant + Shimano UN54 107mm + Dia Compe Gran + EAI = Weslito (Use a 107mm JIS for 42mm chainline, not 110mm as IRD advise)
Lasco Chainset + Tange 103mm + SJSc hub + Dicta Threaded = Branwen
Mavic Fluted Road Double (Inner Ring Lip Filed Off) + Campagnolo Chorus 102mm BB + Phil Wood + Phil Wood = Pistoffski
Middleburn RS1+ Shimano XT 68 113mm + White Bros Eno + Surly/ Miche = tommid
Mighty (£15 ebay) + Shimano un54 122.5mm + sjsc hub+ sjsc cog = ile
Nervar + Tange 115mm + Zenith + Surly (3/32" chain) = gwEm
Ofmega 49t + Campag + Miche + DA = Tobyprice
Ofmega 52 tooth + Shimano/110mm Italian thrd + Formula + Surly = P!MP(somehow it works)
Pake + UN54 107mm + SJS/Formula + Miche = Frankie_j
Paul + Campag Centaur 111mm + Goldtec + Surly = yorkiefix
Paul + Campag Centaur 111mm + paul + phil = flickwg, nosferatu BIG UP PAUL COMP
Paul + Phil Wood 110.5mm + Phil Wood + Dura Ace = richoking
Paul Comp + Phil Wood BRS10S 110.5mm + Paul Comp + Surly = Jonesy
Profil Race Cranks with Gusset Chainring, Profile Euro BB, Philwood, Philwood = Object
RPM + Shimano UN54/110mm + Condor (non-Goldtec) + Condor = Brett
Raceface Decadence + Raceface Cadence X-Type + Formula + Token = Kinsella
Schwinn Stingray + FSA 110mm JIS + Quando flip flop hub + dura ace cog 1/8 = ile
Shimano 600 + UN54/110mm+ Suzue SIL-SP track hub + Miche 1/8 sprocket. =DFP
Shimano 600 + UN54/110mm + Goldtec 126mm track hub + 3/32 EAI = Prime heretic
Shimano 600 Road Double + Shimano 107mm + System Ex + a cog (possibly) = hippy TI Raleigh
Shimano 600 road double(gebhardt chainring) + Shimano 107mm + Systemex +cheapy cog = BrianClose
Shimano sora double + Prestine threadless 110.5 + on-one dble fixed + on one = Bernhard (42mm I think)
Shimano Sora (Double - Inside mounted chainring) + Shimano UN54/107mm + Novatech Hubs + Miche = Pifko
Shimano 105 (Double - inside mounted chainring) + 105 Hollowtech + Formula + Shimano BMX freewheel = ctznsmith
Shimano 105 (Double - inside mounted chainring) + Shimano UN54/110mm + Suzue Basic + Ambrosio = Specialist
Shimano 105 (Double - outside mounted chainring) + Shimano UN72/ 107mm + Shimano XT front disc hub (from Velosolo) spaced to 120mm undished + 5mm spacers behind cog + Velosolo bolt on cog = welpeur
Shimano Exage EX300 double (ring on outer side)+ Shimano un 71 113mm + Formula=ile
Shimano Nexus NX60+Campagnolo+Campagnolo Record Pista+Campagnolo Record Pista(+Silva)=east end images
SRAM S300 1.1 + GXP BB cups + 'Raleigh Build' Crap Generic Hub on Mach 1 Omega factory build junk + EAI = Ninjaslim
SRAM S300 1.1 + GXP BB cups + King Kong 219R Hub (130 mm) + Shimano freewheel = 42 mm chainline = Carson
SR Apex 165 (118bcd) + Shimano UN54/115mm + System Ex (Condor) + Dura-Ace = cold blow
SR Apex 170 (144bcd) (with Chainring inside spider) + YST threadless 119mm BB + On-One +Surly = A EF
SR Sakae + Shimano UN54/118mm + SJS (SystemEx et al) + Andel = ChrisNW {42mm}
Sugino XD silver TRIPLE + UN54/107mm + Dura-Ace 1/8" + Goldtec = rogerzilla (46.5mm, chainring on inside of crank)
Sugino XD black DOUBLE + UN54/107mm + Dura-Ace 1/8" + Goldtec = rogerzilla (46.5mm, chainring on OUTSIDE of crank this time)
SR Sakae Apex + Campagnolo Veloce + Miche + Dura Ace (+ macneil traveler grips) = Joao+BCN
Sugino Langster Speciales + Sugino 103mm + System Ex + Ye Olde Englishe Coge = hippymess
Sugino Maxy + 3SB (121.5mm asymmetric) cup&cone + Miche + EAI = welpeur
Sugino Super Maxy + Tange 115mm (with 1mm BB Spacer) + Zenith (same as Formula etc) + Surly = A EF
Suntour Superbe Pro + Phil 108mm JIS + Dura Ace = tick.tick.tick
TA + TA(314) + Campag + Miche = Fruitbat
TA Alize Piste+Stronglight 110 ISO+Goldtec+Miche=Mitre_Tester
TA Cyclotourist + Stronglight + On One + Condor
Truvativ + (??) stock bianchi pista + phil wood + EAI = asm }
Truvativ Omnium + Truativ GXP External BB cups + On-One Hubs + Miche/Dura-Ace = Pifko
Truvativ Omnium + Truativ GXP External BB cups + Condor Uno + Miche/Dura-Ace = Pifko
Truvativ Omnium+Truvativ GXP+Navigator Pista+Miche=Mitre_Tester's sister-in-law
Truativ Omnium + Truativ GXP + Bontrager Aeolus 5.0+Dura Ace = Sainsburys Ed
White Industries + Phil + Milwaukee(Ben's) + EAI = Archi Pelago
White Industries + Phil 111mm + White Industries + White Industries = Rod Munch
White Industries + Phil 111mm+ LeVeL 135 + LeVeL = Eyebrows 47mm chainline
White Industries + Shimano/110mm + Phils + White Industries = big daddy wayne
Zeus Pista (circa 80's) + Campag Pista 109mm + Formula + Miche = tristoo

        [report](http://www.lfgss.com/report.php?p=1683221)   [comment](http://www.lfgss.com/reputation.php?p=1683221)

Is it the lock nuts you're referring to?

If so, this thread is relevant:

http://www.lfgss.com/thread3182.html

If Condor is not accessible to you, give these guys a ring if it is for Formula / Ambrosio / System EX:

http://www.ambrosio.co.uk/index.htm

Hi,

I have managed to split my rear axle spacer/washer in half while over tightening. I have looked everywhere for an on-line shop that sells these wee buggers, but can't find anywhere.

I can find non-threaded spacers. But it's the little threaded washers that go on the end that I am after. Does anyone know where I can find these?

Much appreciated.

Seems odd: the "fixed cup", with some exceptions (Italian threaded BBs) has a left hand thread. I think it would be virtually impossible to get it into the wrong side.

Maybe the LBS guy means that it's stuck rather than "fixed".

What sort of lap times are you Saturday morning types doing / how many laps?