-
I agree, the sjs ones are fugly!!
-
If they are stops, not clips, they should work OK. Where have you seen them advertised?
-
If you are going to run bare wire in the middle, you really need cable stops, not cable clips. The ones you have pictured are clips for holding the outer cable to the frame and won't work very well with bare wire. They are available,but not quite sure where from. I'll have a look in my clips (various) tin tomorrow and get back to you.
-
@upstart
Yes, still OK for time trials under CTT Regulations. -
If this is for racing on, ie Track Pursuiting, you need to have equal wheel sizes. 650 front/700 rear is no longer allowed under BC/UCI rules.
-
Pretty sure these will fit:
http://cgi.ebay.co.uk/MKS-Sylvan-Pedal-Dustcap-Each-New-/400174627048?pt=Cycling_Parts_Accessories&hash=item5d2c4438e8I know they aren't Campag, but the only Campag one I could find on ebay was £30 plus postage EACH!!
I thought Campyoldy and Dave Marsh both had some, but I've just had a look and can't find any. Perhaps your best bet is to try Parr's Wood Cycle Jumble next Saturday (9th April) 9am-1pm. -
This of any interest? It's 60cm seat tube c-c:
http://www.flickr.com/photos/dkmikesbikes/5532379252/ -
Pm me your snail mail address and I'll try to get one in the post to you tomorrow.
-
I'll go in the garage in a minute and have a look.
-
Hilary Stone has a nice Holdsworth on his website here:
http://hilarystone.com/frameset.html -
both for screw-on block, not cassette.
-
You have PM
-
Just had a look in the garage and the two spare ones I found were both rears, sorry.
-
Campag large flange track hub, in good condition, 32 or 36 hole, probably £50-£60. A bit less for 28 or 40 hole. If you want C record (aka Sheriff Star), add another 30 or 40 quid!!
-
Pretty sure I've got a spare one in the garage. I'll try to remember to have a look tomorrow.
-
how much do you need?
-
or have a punt on this, might work out cheaper:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=220743848797&ssPageName=STRK:MEBIDX:IT
LFGSS
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
Just been and looked in my tin and can find loads of clips, but no stops. The only stops I can find are for the seat stay to stop the gear cable. I think flickwg's solution is best.