Search results for:

Jtek ti post - https://www.sjscycles.co.uk/seat-posts/520mm-jtek-titanium-seat-post-for-brompton/

Carbon rims are no lighter...

Best thing you can do wheel wise IMO is just go 2spd rear and build a front with a superlight hub / wheel build - https://www.sjscycles.co.uk/wheelswheels-front/sjsc-for-brompton-front-wheel-black/

the chain or chainring hits?

helpful! worth a phone call?

Brompton products can not be posted to countries where there is a brompton dealer...

Definitely full rebuild, and yes agree with the standard brompton rim, or sjscycles have cr18s made specially ...
https://www.sjscycles.co.uk/rims-tape/sun-cr18-16-x-1-38-349-abt-alloy-rim-black-28-hole/
has edscoble says, fronts are better to replace, unless dynamo, or even better, get a super light version ...
https://www.sjscycles.co.uk/wheelswheels-front/sjsc-for-brompton-super-light-front-wheel-black/

(146mm spokes with angle drilled rim)

not seen one to date, only the plates ( in alu) to use carbon rails, or the bolt in ti - https://www.sjscycles.co.uk/saddles/ti-parts-workshop-saddle-clamp-titanium-bolt/

at minimum 60t, at max, 109t!

I would suggest trying bringing it forward slightly, can take a lot of the pressure off knees, i really notice when mines a tad far back!

also, how far back is your saddle?

get a bigger chainring and that will help :)

The pentaclip is 109 grams, making the TPW 75 grams heavier,and not as slick with the Jtek clamping system looking lovely!

is very very nice, but not as light as the JTEK and doesnt loose the pentaclip - which is not a good/bad thing ..

due september, got 8 on order for the shop im at, so excited to see them / nervous Ill have no money left...

its got an overbuilt crown and a sock style dropout, its pretty swish for a little wheel fork!

my other half has a custom lagoon/BE and its rad, I think i like it enough to have one, but also like the berry crush/BE idea

brompton valves are removable.

stans has been working fine for me an my gf for 1000+ miles each, and loads of customer bikes have reported good things

Jtek ti is light, looks rad, and still has the lip so it functions properly. Carbon is a dirty material to use on a Brompton ;)

https://www.sjscycles.co.uk/tyres-tubestubeless-tyre-spares/finish-line-multiseal-sealant-4-oz-bottle/

use half a bottle, should not dry up so no need to top up.

Yes.

Remove the valve core, squirt in the sealant, refit the core, inflate, ride.

question time,

Berry crush or lagoon blue black edition?!

1. hard pads give less feel, 2. goodbye rims.
   

Why would you push harder if the syringe was stiff?! Probably blown a seal...

anyway, I tend to draw the fluid in from the top and not had an issue so far

Ti folding/removable pedals here - https://www.sjscycles.co.uk/ti-parts-workshop/

Also look at the Jtek Ti seatpost