Search results for:

dips 'dos santos' bike

I'm afraid only the frame is for sale, not the whole bike

All items to be collected from Stoke Newington, N16. I work in Hammersmith though so can bring smaller items west or meet along the way.

‘Dos Santos’ track frame
54cm top tube, 52cm seat tube.

Bright/Royal blue with half chrome forks and seat stays. Chrome in good condition on the forks but a little shabby on the seat stays, not bad by any means though.

Not drilled for a brake anywhere.

Interesting lugs, never really seen anything similar. Don’t know anything about the tubing but it’s pretty light, the frame’s badged ‘Dos Santos’ by Toni Pedro’s cycle art, which is presumably the guy who sprayed the frame rather than made it. It also says Grand Prix on the top tube which will help you go faster. On the seat tube there’s the logo for Hammer ‘n’ Cycle which following a quick Google seems to be a bike shop in Australia.

Quite a few stone chips, could maybe do with a re-spray but also nice as it is.
No dings or dents. However the seat clamp seems to be a bit wonky, this has been the case since I’ve owned the frame and seems to be entirely cosmetic, as I’ve had no problems with it so far. You should be able to see this in the photos.

Includes Campagnolo bottom bracket and 26.6mm seat post. Haven’t a clue what the headset is, it’s pretty smooth but a silver one would certainly suit the frame better, I just never got round to changing it.

Pictures with 23c wheels to give an idea of clearances.

**SOLD
**
26.4mm Seatpost
330mm long, some insertion marks but otherwise excellent condition.
SOLD

Lake SPD Cycle Shoes
Size 10 / 44
No insoles or the butterfly plate things that the cleats screw into. Bought from eBay and worn once but they're a bit too big for me.
£5

Reydell GTI Saddle
Blue/grey colour, fairly shabby but still usable
SOLD

San Marco Concor Supercorsa
Pretty worn but still usable, same saddle as in the photos of the frame above
SOLD

Campagnolo Super Record Pista BB
English threaded 109mm ISO
Bought from the forum but I didn't need it in the end and it's been sitting in a drawer. Bearings will need some new grease but otherwise good to go.
SOLD

Kalloy Quill Stem
25.4mm clamp, 100mm long
SOLD

Sakae Quill Stem
25.4mm clamp, 80mm long
SOLD

Raleigh Stratos Road Frame
57cm top tube, 54cm seat tube. Piece of shit but could make an okay beater with a little effort. Will take 700c wheels, comes with a knackered BB and headset, back brake, lever, flat bars, cranks and pedals.
SOLD

dibs

dibs tyres, if that's for both?

3rd dibs

PM'd yesterday about the wheelset, let me know

PM'd about risers

Now selling this http://www.londonfgss.com/thread31336.html

I'll take a photo of the dents and one with wheels on tomorrow. Never ridden a lo pro before but I'd certainly be interested if I could try it out first.

Now for sale - £270

I would rather trade as I'd rather have a new frame than the cash for a new frame, if that makes sense, but if it's a decent offer of course I'll consider it.

I put this up a while ago (http://www.londonfgss.com/thread25156.html) but I was in the middle of moving house and I never sorted anything out. The frame hasn't been on the road since then and has been in storage gathering dust, it's really nice and needs to be ridden! I wish I could use it but it's just too big for me.
Looking to trade for something around 54/55cm but will consider offers of part-exchange or if you have a frame you want to sell me.

Details:
Reynolds 531 tubing, 58cm c-c, c-t. Campagnolo Chorus Headset, Miche Primato BB.
Powdercoated at Armourtex in April 09, with brand new decals from H Lloyd Cycles (http://www.hlloydcycles.com/) these have not had a clearcoat over them so you could remove if you want.
Campagnolo fork and track ends (unfortunately you can only just make out the engraving through the powdercoat), forks are drilled for a front brake with the rear of the hole enlarged to take a modern brake caliper.
Clearances are pretty tight, unfortunately haven't had a chance to take a photo with wheels but I can do if there's interest.
Couple of tiny dents on the top tube, one of which is underneath the top tube protector (obviously I added it too late!) which is a hand stitched piece of brown leather. Not particularly noticeable or structurally problematic. Everything else is straight and true.
The stem is also stuck as the hex key bolt has been rounded off, obviously you could remove this by removing the headset, it's a fairly nice (Atax) stem anyway, though it could do with a polish.

Roy Thame worked for Holdsworth cycles and you can read more about him here (http://en.wikipedia.org/wiki/Holdsworth), the serial number is stamped on steerer and I have photos of this before the headset was put on at home somewhere if you're interested.

Thanks for looking.

I got a decent pair of vintage NHS glasses from here http://www.retrospecs.co.uk/, they have a shop in St. Albans where you can try them on properly. Though the shop is actually called Robert Roope Opticians. I think it costs about £6 to get there on the train and I had a nice ride around the town while they fitted my lenses.

A Miche cog will work with a System-Ex hub but you'll need a Dura Ace lockring as the Miche won't fit.

enjoy, a bit greasy, but in fine working order

Did you get it from here?

Sorry just looked properly at the photo and it obviously is!

Is the front small flange?

@kieran - airus has first dibs but hasn't got back to me so will e-mail you if I don't hear back soon.

@ma9n3t - I've PM'd you about the frame

Moving house and clearing out some old parts:

Miche 1/8th 15t Sprocket and carrier. Sprocket has a bit of wear but plenty of life, carrier is new, never used. £SOLD

Look Pedals £Red Stripe

Exustar Stelvio Touring/Spinning Shoes, brand new and still boxed with full packaging Size 44 (9.5) cost around £70 new £SOLD

Peugeot 170mm Cranks, Campy rip off, 122BCD, 42t chainring
Two teeth have snapped off the chainring and a couple of crank bolts are missing (the others are stuck), I can throw in a new set of crank bolts though. £10
46t 3/32 Chainring 122BCD (fits cranks), no brand. £7
Could be quite a nice vintage style crankset if you have the time to sort it out/give everything a polish etc.

Also looking to possibly sell, or ideally trade my Roy Thame track frame.
Reynolds 531 tubing, 58cm c-c, c-t. Campagnolo Chorus Headset, Miche Primato BB.
Powdercoated at Armourtex in April 09, with brand new decals from H Lloyd Cycles just added last week.
Campagnolo fork and track ends (unfortunately you can only just make out the engraving through the powdercoat though), forks are drilled for a front brake with the rear of the hole enlarged to take a modern brake caliper.
Couple of tiny dents on the top tube, one of which is underneath the top tube protector (which I obviously added too late!).
The stem is also stuck as the hex key bolt has been rounded off (obviously you could remove this by removing the headset, it's a fairly nice stem anyway though).
Picture doesn't really do it justice, the green looks a lot more lively in the flesh, I can take some better ones if there is any interest.

I am looking for a smaller 54-56cm track frame to ideally trade, would love to keep this but it's just a bit too big for me.

Live in Homerton, work in Hammersmith so collection from either or anywhere on my route to/from work.

Silver?

PM'd

http://www.youtube.com/watch?v=uTWKBf2eN8w

Sprocket/lockring included?

These are single gate, double bridge, pretty much the same as the ones you linked to, nothing special but not bad for under a tenner
http://www.on-one-shop.co.uk/acatalog/Clips_and_Straps.html (scroll down to 'Planet X Kinbaku-Bi Chrome Steel Double Toe Clip')

I have one of these http://www.sjscycles.co.uk/product.asp?pf_id=836 new and unused in 26.4, you can have it for £10.