-
If it is hub motor, you can get torque sensing Bottom brackets.
-
Found this two options on ebay
Anyone tried and survived to tell the stories? -
Outside of the 1x shifters, they should work with Shimano road compnents
-
Borneo as in the island of borneo where the builder is.
He started building track bikes initially.
Hence Borneo Track -
Hmm actually I always thought it is the other way, that clipless means higher seatpost.
I'll try raising it as you suggest next ride.
This would mean my seat height was also not optimal when riding clipless then right? But maybe not enough that is causing any pain or discomfort.So there is a difference between the optimal seat height for the two side of the pedal.
Hence to me it defeat the purpose of two type on one pedal. -
Not sure I can describe it accurately, but there is some pain in the front part of the knee if riding with vans on the flat part of the pedal,
Pedals are the SH500 same as @chris0 up there.
No such pain when using the same pedal with clipless shoe (Shimano xc5) on the same seat height or when I was using MKS gamma before. -
Same here, had to lower the seat else knee pain in longish ride in flat.
-
Yes it will work, as long as the 10 speed shifter is not tiagra 4700 and GRX
-
US $73.00 | wokecyc Road Bike Fork Carbon 700C Thru Axle 100*12mm Matte or Glossy Flat Mount Disc Brake T1000 Toray Carbon Fiber Road Forks
https://a.aliexpress.com/_mtGAXmwMight fill the bill
-
Those ebay kalloy Uno lightweight stems are quite slim I think and available in 17 and 7 degrees
-
G One all round is available on that size I think.
-
There's a 105 Cassette that use the same sizing as MTB 11 speed, quite possibly this is the hg700 mentioned by @MisterTomTom
-
The old 10 speed road is all the same pull (before tiagra 4700) and is compatible with up to 9 speed MTB stuff.
10 speed MTB has different pull with road, so this only works with other 10 speed MTB.
-
Chinese titanium or simworks/nitto steel ones.
Standard Alloy one has been hit and miss for me. Some is quite thin but most are the one that you are using
-
Some kind of race number holder?
-
It's this one
https://thecycleclinic.co.uk/products/kinlin-tl-23-650b-27-5-mtb-touring-tubeless-compatible-rimAs @miro_o said, it is the homage tyres that is not tubeless compatible, Although some succeed in getting it work as tubeless.
-
A friend set the 650x42b tubeless with some kinlin rims, the rear is fine but the front keeps losing air massively and needs to be topped with fluid constantly.
I don't think they formally rated for tubeless though.
-
Up to 10 speed road (pre tiagra 4700) and 9 speed MTB have the same pull.
-
#Aliexpress US $7.11 29%OFF | Mountain Bike MTB Handlebar Front Fork Stem Riser Aluminum Rise Extender Bicicleta accessories
https://a.aliexpress.com/_dVh639VAnyone have experience with this kind of steerer extender?
-
Yes the maxxis, looking to replace the wtb horizons on my marin nicasio.
No worries @frankenbike
-
Cheers mate!
-
Would love to hear more if you or @frankenbike decide to try this especially the real width. As they claims 47 but 1.75 should be around 44 right?
-
Looks like the muirwood takes it place on the current line up
https://www.marinbikes.com/ww/bikes/20-muirwoods-rc
LFGSS
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
I use mini pumps with their screw in head