Most recent activity
-
- 4 comments
- 1,158 views
-
Unfortunately due to buying another cross bike and a lack of space I need to let possibly my favourite bike I've ever owned go. Recently featured on the Radavists Readers Rides: https://theradavist.com/2020/10/readers-rides-theos-custom-polished-95-track-cannondale-caadx/
It's a custom painted Cannondale CAADX framset with a woundup fork, inspired by a '95 Ctrack.
I've raced it all last cross season and loved it, then swapped to some wider tyres and a bigger cassette over summer and ridden it on some longer gravel rides and it's been more than capable throughout. You could even stick some slicker tyres and a rack on the back of it an commute on it, if you wanted.
The specs are a little different to pictured, most notably the Infocrank has been swapped out for a Hope RX Crankset. I can take some more up to date photos if they're needed.
It's a long cage rear mech so you can swap the cross cassette out for something with a bit more range if you wanted (11-42), or you could run the whole thing 2x as it’s a double left hand lever and the crankset will take it.
Groupset is a mix of Ultegra, Deore XT and GRX but is all Ultegra level. Wheels are some Bitex hubs laced to DT XR331's hand built by Jonny at Noble Wheels, currently with some 33c Maxxis Mud Wrestlers fitted. I have a pair of 38c Gravel King SK's if you'd rather them.
All the parts except frame and fork were brand new less than a year ago and they haven't seen that much use. The cranks and BB have been ridden less than 5 times.
I also have a custom made Wizard Works x Thomson half frame bag for it which I'm struggling with the idea of letting go but I could be persuaded.
Looking for £2k
A full build spec is below
• Cannondale CAADX Frameset 56cm - Custom Painted • Woundup Disc Fork • Ultegra R8020 shifters • Deore XT M8100 2 pot calipers • Deore XT RT81 rotors 160/160 • GRX RX812 rear mech • KMC SL chain • Ultegra HG800 11-34 cassette • Thomson Elite X4 110x0° w/ Ti bolts • Thomson Elite inline post • Fabric Scoop Pro Team saddle • Fabric Knurl tape • Ritchey WCS Evomax bars 42cm • Maxxis Mud Wrestler 700x33c/Panaracer Gravel King SK 700x38c • Hope BB30 BB • Hope RX Crankset w/ 110 spider 172.5 • Hope 40T Retainer ring • Bitex Hubs/Sapim CX-Rays/DT Swiss XR331 and DT Swiss RWS skewers -
thanks, will let you know if we decide to split
-
Selling for my girlfriend. Built up as a winter/spare bike but need to make room for a new team bike.
Purchased secondhand in a barely used condition a few years ago, hasn't had a huge amount of use but has picked up scuffs in storage on the custom paint job. It's been really well maintained throughout its life and most of the parts have been replaced/upgraded while she's had it, although we'd recommend a new chain.
Condor Baracchi carbon frame
Ultegra 6700 10 speed groupset (50/34, 11-28)
Roval SLX24 wheelset
Gatorskin 23mm tyres (used for one ride, £70 rrp for the pair)
Condor carbon Strada seat post
Rapha Brevet bar tape (barely used except I managed to scuff one side)
Brand new, never been ridden fabric line saddle (£75 rrp)
Deda Zero100 stem 80mm
Genetic Creed road bars 38cm
Pictured with Look Keo Classic 2 pedalsLooking for £700, it is currently located in Cambridge at my parents. Could arrange collection in London/Hertford or potentially post.
-
Interested in everything but the cranks if snaker hasn't taken them?
-
- 1 comment
- 103 views
-
Worn once for about 15 minutes before realising they're the wrong size. Fitted cleats to them though so they can't be returned annoyingly. They are size 40/6.5
Bought for £200, willing to let them go for £150.
Ideally collection from East/Central/South but would consider delivering them.
Cinelli Mash Work, Cinelli Vigorelli Road, Cannondale CAADX