Most recent activity
-
Hi all.
I need to rebuild my rear carbon wheel after a second spoke failure in a year. Is it a bad idea to replace one spoke at a time making trueing easier or take the tension of each spoke gradually and replace all the spokes and rebuild. Thanks -
Need to replace wheel bearings in a novatec rear hub and freewheel. I have a icetoolz for knocking out BB bearings, is their a similar tool for hubs?
-
My new Giant Gavia tyres on 411 rims will only take about 40psi and then leaks from around the valve(caffelatex included). Ive tried the O ring on the inside and outside of the rim. Any advice would be great and just for future reference which is the correct position for the O ring. thanks
-
Two parts to this post.
I've just changed to the winter bike and fitted some Vittoria Terreno Zero to kinlin XR22t rims which proved to be the easiest tubeless i have ever done.
Secondly i was using Schwalbe Pro One Evo on the best summer bike which i was very happy with but they have "squared off" badly on around a 1000 miles so i'm looking for recommendations on 25mm fast rolling tyres for the "best bike"? -
Just bought a Giant Propel frame set so want/need some Aero wheels. I already have some Dura Ace 9000 hubs (20 and 24 hole respectively) so looking for recommendation for 50 to 60mm carbon rims?
-
Can i ask a quick hub rebuild question please. i've replaced the bearings in my novatec d772 hub. Do peaple use a threadlock compound on the hub axle as i have to back of the locking nut "half a turn" to get smooth operation. thanks
-
not surprised Tester, just asking the question before I buy the 23mm version
-
Anybody have experience of Schwalbe Pro One Evo MicroSkins, just bought a pair of 25mm for my giant TCR and they have come up more like 28 to 30mm tyres, is it just this tyre rim combination (SLR1 wheels) or is this normal for these tyres? Thanks.
Upgrading my CX brakes and have bought these calipers and matching shifters. Anyway I’m putting together a shopping list of bits required. Do I need to remove the bleed screw and buy a bleed nipple?