Most recent activity
-
- 1 comment
- 76 views
-
44cm wide, for 31.8 stem. Swapped these out for a narrower bar, and don't want them in the back of my cupboard (chance of growing wider shoulders at this stage of life seems low to nil). Good condition. Obviously not a top brand (wiggle's own) but seem as good as anything else I've had tbh. Compact drop - 90mm reach, 140mm drop. Say a fiver? I work near Barbican and live in and around E9 & E5. Happy to drop off if I'm cycling nearish.
-
Anyone got any tips on where to get nice square white bathroom wall tiles from? Was hoping to find a more reasonably priced & easily available copy of curved edge tiles from DTile but my internet searches are coming up with nothing: https://www.designboom.com/design/peter-van-der-jagt-erik-jan-kwakkel-arnout-visser-dtile/. But if those aren't a thing, possible alternatives in standard square white tile?
-
I'm looking for the same right now, so if anyone has any recommendations... Or alternatives to birch ply? And finally any recommendations for a track saw? Have a Makita circular saw but it's a smaller one which doesn't take the standard track adapter - should I DIY a perspex track adapter or just buy a suitable track saw? Got quite a few bits - pipe boxes, shelves, etc - to so
-
-
Swapping out the fork on my pompino to a surly cross check canti fork and looking for a front rack that has two side struts at the top to connect to the outer mounts at top of the fork (as opposed to a single stut running from the hole in the centre of the fork crown, which I don't want to use as already have a mudguard fitting and a brake judder thing attached there). Any recommendations? Surly 24 pack would do it but they're (a) very expensive and (b) seemingly pretty much unavailable.
Maybe an origin8 but use something like these to get the side struts?
https://www.sjscycles.co.uk/luggage/carradice-bagman-stabiliser-struts/
https://surlybikes.com/parts/24_pack_rack
The forks showing the top side connection points (but mine also has rack mounts at the base of the fork, in addition to the mudguard mounting points, so can run long downwards struts): https://surlybikes.com/parts/cross-check_fork
Thanks!
Tom
-
I'd love a couple of bits, or even just one, if available still