Most recent activity
-
- 51 comments
- 7,242 views
-
- 78 comments
- 2,000 views
-
The Pepper is already narrow. I am talking about cutting wide (+600mm) riser bars down to 500 or less, which makes no sense at all.
But thanks for the advice, so it's 4 now
-
Will work great if you tend to ues copper tubes from your heating as handlebars!
-
doesn't the ID shrink and OD expand?
Nope, both ID and OD expand. Imagine the atoms next to each other forming the innermost layer of the ring. If the distance between each two atoms goes up due to heat, the ID naturally increases, too.
-
Sorry to disappoint you guys but cutting down wide bars to ~50cm is NOT the same. The position and angle of the bends in a narrow riser is completely different because it's much more narrow and steeper. Cut down wide bars and you end up with almost unusable crap.
-
Hi,
are there really only three narrow (<52cm) riser bars out there with a 31.8 clamping area?All I can find is the silver-only Nitto B267, the ugly Deda Streetissimo and the cheap-ish BLB Mini Me OS.
Any others?
Not exactly a ahead stem..