Most recent activity
-
Whilst I do respect the time honoured Dibs system, I'll gladly take the fork off you right here and now if you don't want to hang about.
-
What rake is the Enve?
Edit: 2nd dibs on it if its 45mm -
Dibs on the Aerolinks please.
Assuming they are the dark grey ones right? -
My tube was definitely a manufacturing error, my experience up until that point had been pretty positive, no issues installing and no punctures but that one negative experience has somewhat put me off using them.
-
Thanks, I’m in E2 but if I can’t sort it out myself SE1 isn’t very far so I may very well take you up on your offer if it’s not too much trouble
-
Appreciate the offer but don’t go to the trouble on my account, I’m sure I can find a video showing me what I need to do.
-
It rubs once per rotation and it gets progressively worse. If I re-align the calliper and spin the wheel it doesn't rub, it only starts to rub once I squeeze the lever firmly. Once its started to rub, if I'm riding and keep using the front brake, it will start to rub worse.
-
Thanks @snottyotter I'll give that a go over the weekend.
Rotor is brand new and the old one looks pretty straight too so it must be something to do with the piston as you suggest. -
Haha, if it was a minor rub I could live with it but its pretty severe
-
My front brake keeps rubbing badly no matter what I do and Im at my wits end.
I re-aligned the calliper several times, works fine for 5 minutes but the minute I squeeze the lever hard it starts rubbing again.
I took it to a trusted bike shop, they took the calliper off, checked it over, realigned it but it started rubbing again before I even made it home. They suggested that the rotor might be the problem and that I swap it out for a proper SRAM one so I bought a brand new SRAM rotor and had that installed, same problem.
Does anyone have any ideas?
Black metal, black coffee, black heart ;p