Avatar for TeeCee18


Member since Jun 2020 • Last active Jun 2022
  • 1 conversations

Most recent activity

  • in Wanted Adverts
    Avatar for TeeCee18

    I have a Shimano UN55 (110mm) and a UN300 (118mm) if you're still looking? here

    Unsure about campag compatability, but I assume sq taper is sq taper?

  • in Components and clothing
    Avatar for TeeCee18

    I've had a high turn over of bike part over the last 6 months, partly due to upgrading some bits, partly due to being in a crash and having to write off a frame! Either way it's finally time to start freeing up some space.

    I am based in Cardiff, so all prices are + P&P, but collection is OK if anyone is local. I am often passing through Bristol, so could potentially meet somewhere there.
    Open to offers, especially on the GX crankset (see description).

    Full set of photos can be seen here: https://drive.google.com/drive/folders/1­--9WZBUufvdp92BRr27mqLS0jac8q1P1

    1. Shimano Tiagra 4503 3x9 speed shifters - £50 - Good condition, never been crashed but they are slightly scuffed on the clear plastic top. Some pitting on the lever part.
    2. Shimano Tiagra 4500 GS RD - £20 - This mechanically is sound, but as you can see in the pics it is very "weathered". Bearings run reasonably smooth, but if I were being picky then could do with new jockey wheels.
    3. Shimano Tiagra 4503 Triple FD Band-on 34.9mm - £20 - VGC.
    4. Shimano 5800 FD braze on - £10 - VGC This is the original style, and not the updated 5800 (5801).
    5. Mpart front derailleur hanger 34.9mm - £5? - VGC, used for approx 50 miles before changing frame.
    6. Shimano UN55 68mm 110mm Bottom bracket - £20 - VGC, used for approx 100 miles, then replaced as I changed the cranks and bb to hollowtech. I believe these aren't available to buy any more, and are considered better than the UN300 .
    7. Shimano UN300 68mm 118mm - £10 - BNIB. I bought this as a backup, but then moved to hollowtech, as mentioned above.
    8. Shimano BBR60 - £10 - VGC, used for approx 50 miles before I was in a crash where the frame was written off. New frame uses a different BB, and so this is now not needed. Can come with fitting tool if required (TL-FC25).
    9. SRAM PG950 cassette 11-28 - £10 - 9 speed, good condition.
    10. Brake calipers "long reach" - £10 - these are non-branded, but from the model number etched into the back I believe they are Promax RC459. Based on measuring with a ruler, they are long reach.
    11. Shimano PD-R540 pedals - £5? - Bit scuffed, but fully functionable.
    12. SKS Bluemels 35 matte - SOLD
    13. Crud Roadracer 2 mudguards - SOLD
    14. Continental UltraSport 2 28mm (folding) - £10 each - Fitted but never used. Fitted these to my bike to find the frame didn't have the clearance for them ... DOH! :(
    15. SRAM GX Dub Crankset, 170mm, 32T - £40? open to offers - These came fitted to a MTB which I bought recently, but on the first outing, the pedal rounded out the NDS crank's thread, and the pedal fell out ... After lots of back-and-forth with SRAM/the OEM, I got these replaced on warranty. If someone was after just a drive side crank arm, or had the time/skill to attempt retapping it, then I think these could be a bargain?

  • in Wanted Adverts
    Avatar for TeeCee18

    Just ordered one of these off ebay - 105 FD5801
    For £14 it seemed pretty hard to beat IMO