Avatar for Kev-8

Kev-8

Member since Jul 2018 • Last active Aug 2020
  • 0 conversations
  • 6 comments

Most recent activity

  • in Bikes & Bits
    Avatar for Kev-8

    I just use a d lock through the chain stay, wheel then out and locked over one crank arm in line with the chainstays

  • Avatar for Kev-8

    We’ve got an igo2, my boys are both around 100cm and have a bit of growing room but not much I’d say!

    Our main bike is a front loading cargo bike and with the right bars/stem i can easily fit in the box and I’m 6 ft 2

  • in Bikes & Bits
    Avatar for Kev-8

    I built a cycle truck from an old Dawes galaxy, mega shimmy at any speeds above about 15, I put it down the skinny tubes and 1” headset. I built a fake bullit before and that’s super stable with similar ht angles. Someone put a computerised thing on Instagram about cycle truck geometry. Maybe haulin Colin or Eerder metal works

  • in Bikes & Bits
    Avatar for Kev-8

    The bottom of my box measures 730x600, obviously its longer at the top because of the slope. I dont think id wanna go much wider than 600

  • in Bikes & Bits
    Avatar for Kev-8

    Biggest load ive had on my bullitt copy, 1000mm wide chest freezer. I reckon an omnium could take more/bigger cargo with less awkwardness

  • in Bikes & Bits
    Avatar for Kev-8

    This is my bullitt copy, i found an old steel frame and made everything from the seattube forward, now with pedal assist as we have some killer hills in devon. Regularly have our twin boys in it, first time was when they turned 11 months old. Oh and a big trailer for even more stuffz

Actions