Avatar for r.hobbs

r.hobbs

Member since Jun 2018 • Last active Apr 2021

Most recent activity

  • in Bikes & Bits
    Avatar for r.hobbs

    install headset on a Bullitthttps://issuu.com/jimslade9/docs/­bullitt_assembly_manual

  • in Bikes & Bits
    Avatar for r.hobbs

    Boost E * 7 weeks ish to go!

  • in Miscellaneous and Meaningless
    Avatar for r.hobbs

    they all end up looking basically the same

    classic camper conversion, boring same same!

  • in General
    Avatar for r.hobbs

    Is Brompton creak a thing?

    No More than any other bike!

  • in General
    Avatar for r.hobbs

    Rear wheel?!

    The Cateye lights, if it’s the Brompton light mount, should be perfect as it’s a Cateye bracket on there. Check the bracket is tight to the mount, been using a 1200 on one for a while no issues

  • in General
    Avatar for r.hobbs

    technically, yes, but kiddo would be leaning forward a bit!

  • in General
    Avatar for r.hobbs

    all set, thanks!

  • in General
    Avatar for r.hobbs

    milian bryant with Bobike is fantastic for kiddos 6months - 2 years
    then 3ish upwards look at the Milian Pere (pricey tho)

  • in General
    Avatar for r.hobbs

    Probably the best person to ask about Brompton on this thread is @Rhobbs

    xxx

  • in General
    Avatar for r.hobbs

    morning,

    M type, with centre of bb to saddle top around 70cm will be 3/4" to the top of the bars.

    If you go with a H type, you add 63mm to the height of the bars (i think off the top of my head) so I would suggest this would be more suitable?

    I have got a H6L in orange due in a few days...

    I also have a H type stem in gloss white in stock; repainting is not an issue, we have to fit the frame parts in house / cannot sell them otherwise.

Actions