Most recent activity
-
May do. It is hurting the style points for sure.
-
Yeah. Ailerons with Dt 240 looked ridiculous and took away from the bike. All discerning Isen owners should desticker wherever possible.
-
Part photo but also the Di2 wire that runs under the tape really makes the end look like it's sagging. Bars being tilted up don't help.
-
Thanks. Pedals are White Industries and clips are King Cage. They're a nice combo. Only thing to note is that the pedal spindles are quite short so may be a consideration for large feet and short chainstays.
-
Finished my build tonight. Bars need to be lowered and leveled out properly but pretty much there. Winter boot pedals on for now. First ride will have to wait as it's -20 deg C with 15cm of new snow on the ground. Very happy with how it turned out.
-
So you went over the downtube? I'll give it a shot. Thanks!
-
Yup, that's the one. I think the route is bring the wire to the frame with the rear brake hose then cross over to non-drive under the downtube to get into that hole.
-
I'll try to cleanly route the wire under the downtube and up into that hole. Trying not to make it look like a hack job is the issue.
-
No worries. We do have different frames then. I've only got the one hole on the drive side by the head tube for brake hose. I thought all frames were spec'd the same way. Speaking with Caren I've now realized that the derailleur Di2 wire holes need to be drilled by me because I didn't let Verity know the groupset earlier. These are reinforced but not drilled. Sounds like the head tube drive side Di2 port was another casualty. I can make it work but it won't be nearly as nice looking.
Thanks for the detail.
Nice build.