• After a few bits for a do-it-all build, not fussy about colour or brand. Doesn't need to be super-nice, but drivetrain bits do need to have minimal wear

    1. Downtube cable adjusters ideally including mounting screws
    2. 110mm BCD (5 arm) chainrings. Need to run 9-speed, so 10 or 11 speed should also be fine. Need a 34T and then anything from 46T-50T considered. If you have a whole 170mm chainset (square taper) with rings I'd consider it.
    3. 9-speed shimano MTB-size cassette, not too fussy about ratio so anything 11/12-34/36

    Will likely need posting.

  • I have a sugino 110bcd 165mm crankset with fsa 46/36 if you are willing to go shorter

  • Thanks, I've already got a 165 double, which I think is the spa cycles sugino copy. I'm looking for a replacement for that as I convert my fixed-gear back to gears.

  • I've got a 9 speed 11-36 in the shed i think, will have a check.

  • I have a brand new xt 11-34. £40 posted.

    Edit: I also have an 8 speed exage chainset you can have for a tenner with the cassette 170mm

    Edit2: I also have some campag Downtube stop.

  • Thanks, that might work, let me know.

  • Cheers, those XT cassettes with the alloy carriers are lovely. I'm not sure what the cost vs. weight-weenery balance is going to be on this build so that might be on the spendy side (still tempted though).

    8-speed drivetrains use wider chainrings and sprockets than 9-speed, so I'm not sure the chainset would work smoothly unless you've replaced the chainrings?

    Possibly interested in the cable stops, assuming that they're not built for a different size housing from shimano ones. Any pics?

  • I've defo got a cheap cassette and down tube stops for you drop me a pm

  • Great stuff! Thanks @sacredhart shall we pick up in our chat about swapping saddles?

  • It's a 9 speed 11-34t, Shimano, not sure 'model', if still needed?

    1 Attachment

    • PXL_20230124_153209042.jpg
  • Post a reply
    • Bold
    • Italics
    • Link
    • Image
    • List
    • Quote
    • code
    • Preview

Wanted: downtube cable adjusters, chainrings/set, cassette (9 speed)

Posted by Avatar for fabfurrymarmots @fabfurrymarmots