I bought this a couple of months ago off here, but after procrastinating building it up have now realised I sadly really don’t need it. It’s been built up with GRX 810 hydraulic shifters and calipers, with a 812 derailleur. I’ve also installed a Hope 30mm T47 bb and put some headset bearings in. The GRX bits were used before fitting so have some marks. The BB has been used for about 50km, and the frame is still unused except for a test run around the block, though may have some marks from storage and fitting parts.
~ 39cm reach
~ 61cm stack
56cm effective top tube
73-75cm saddle to rails
Front same as above if not more
7x7mm saddle clamp ears
Original post https://www.lfgss.com/conversations/380075/#comment16697462
For the frameset and parts mentioned I would like £1100>£1050>£1000.
Can be collected from near Moorgate. Also happy to post, and can sell the frameset separately, but would prefer to sell as is, if possible.
The 650b son dynamo hope wheelset shown, I could sell with some edeluxe lights for around £500. I also have some carbon dt Swiss gravel 700c wheels which I no longer need which could be sold with the frameset if of any interest. Just message with any questions.
Will get better photos in due course.
Don't suppose you'd consider splitting it? Gutted i missed out on the frame the first time
Happy to split it, but will prioritise anyone who can collect and will take as is/with the most bits. Will leave to the weekend or so and if no other interest it’s all yours
Also forgot to say the steerer has been cut, but still fairly long so should be fine for most
Please could you make this a size smaller so that it fits me and I can give you all my money? Many thanks
The isp can be cut shorter and you could put a shorter stem on, so I'm sure it could be made to fit. I've always preferred sizing up for gravel bikes
Price drop bump to £1050 for Frameset, bb, derailleur, shifters, and calipers
For those interested, the dynamo wheelset are kinlin tl-23 rims built onto a hope rs4 hub and son 28 dynamo. Currently setup 12x142 and 12x100, but I have adpaters for qr front and rear. Lights are edelux 2. Drilling is 32/28. The front rim is a gloss finish and the rear matte though they are the same model.
Also can include a parts bin stem and handlebar for the £1050 (not the ones shown)
Would you sell the Carbon DT Swiss Grav wheels separately? Thanks
Yes, happy to split bits, just would rather sell the frameset without having to cut the hoses I bled last week. Have messaged
Final price drop to £1000 for the bundle, or now happy to split £600 for the frameset, excluding bb, but can leave in the headset bearings. Preference to anyone who can collect. Otherwise add postage and paypal fees to prices. Thanks
Is there a website for Caffeine Frameworks as I can't find anything?
Not sure about a website but there’s an Instagram page.
That's what my link is, just without going to Insta :)
Do you have any more geo info?
Afraid not, but can get the tape measure out if you need any specific measurements
I was looking for seat tube and head tube angles really, but I have a suspicion it's a bit on the steep side for me...
Dynamo wheelset price drop without lights £370. Frameset and parts still available
Don't worry about formatting, just type in the text and we'll take care of making sense of it. We will auto-convert links, and if you put asterisks around words we will make them bold.
For a full reference visit the Markdown syntax.
© LFGSS, powered by microcosm.
Report a problem
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.