LeBlaireau
j_p_
amey
Maj-
Post a reply
- Bold
- Italics
- Link
- Image
- List
- Quote
- code
- Preview
Formatting Help
Don't worry about formatting, just type in the text and we'll take care of making sense of it. We will auto-convert links, and if you put asterisks around words we will make them bold.
Tips:
- Create headers by underlining text with ==== or ----
- To *italicise* text put one asterisk each side of the word
- To
**bold** text put two asterisks each side of the word - Embed images by entering:
That's the hard one: exclamation, square brackets and then the URL to the image in brackets. - * Create lists by starting lines with asterisks
- 1. Create numbered lists by starting lines with a number and a dot
- > Quote text by starting lines with >
- Mention another user by @username
- For syntax highlighting, surround the code block with three backticks:
```
Your code goes here
```
Just like Github, a blank line must precede a code block. - If you upload more than 5 files we will display all attachments as thumbnails.
For a full reference visit the Markdown syntax.
I’ve just finished building this up recently but have realised I have absolutely no justification to keep it and need the space. It’s a perfect city run around, and uses a dingle speed magic gear ratio. That is it has two cogs front and rear that are both magic gears, so no tensioner and two ratios. 42-16 and 37-22 by just swapping the chain over. Setup as shown for 6'1 rider.
Spec List:
Soma Groove
Salsa Cromoto Fork
Fulcrum Wheels and shimano rotors - am keeping the ice tech ones shown, so swapping for another set
Gravelking 650b Sk Tyres rear setup tubeless, front was a pain so tubed.
Trutative Crankset
Deore Hydraulic Brakes
Thomson Post and stem
Crank Brother Pedals
Brooks cambium C17
Gamoh Minoura rack
Surly and on one rear cogs
BMX and vuelta front rings
Basically new single speed chain
Everything is working well, some bits were new others bought used. There were some paint chips and rust spots which I artistically covered with gold nail polish. The bleed screws were stuck in place when put together, so there are some marks from wrestling with pliers to avoid rounding, work fine now though.
Currently stored in central London. Will get some better photos at some point.
1 Attachment