I have a set of Equinox Tornado X 50 wheels and am struugling to get any information in replacing the reat wheel bearings. I have reached out to Equinox but have recieved very little help. Anyone replaced the bearings on these wheels?
Prolly 6001-2RS size for standard sealed bearings. Might even say the size on the bearings that already in there. Those hubs look like rebranded novatec / OEM.
thanks for the reply, the issue is that the axle, do i hammer it out as i cannot see any other way to remove it.
The axle just needed hammered out from the drive side and the non deive side bearing came out. The drive side bearing came out easlily enough. Both bearungs are EZO 6802RU. Never heard back from Equinox in the UK or Czech republic.
Don't worry about formatting, just type in the text and we'll take care of making sense of it. We will auto-convert links, and if you put asterisks around words we will make them bold.
For a full reference visit the Markdown syntax.
© LFGSS, powered by microcosm.
Report a problem
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.