• Hope 20Five 700c wheels. Ideal for disc road bikes or gravel bikes. Centrelock version, orange hubs, Shimano 11 Speed freehub body (works with road or MTB cassettes) and 12x100 front and 12x142 rear through axle end caps.

    Only ever used on my summer road bike so in lovely condition. 1530 miles in total covered only. You can see from the freehub they've only had light use.

    They're used so the odd tiny blemish from use but they're in perfect working order, no damage to the rim whatsoever as far as I can see.

    The only thing to point out is the marks on the non drive side end cap. I've taken some pics so you can see that. Used some pliars to remove it when changing a disc rotor once. The marks are purely cosmetic and don't impact the performance in any way, but even still I wanted to highlight the marks.

    They're currently fitted with Schwalbe G-One TLE tyres, 30c. Set up tubeless including valves. Rear showing more wear, front is minty. I'm after £300 posted including the tyres or £250 posted without the tyres as I'm happy to keep them as spares as I've found them a really good road tyre. I'll remove the tyres if you don't want them but I'll still supply the tubeless valves with the wheels.

    I've already got someone interested on a "first dibs" basis but he will decide if he wants them or not so will welcome enquiries in the meantime.

    I also have some brand new 160mm sram centre lock rotors. Selling for £60 the pair including lockrings, but I could bundle with the wheels for an extra £50.

    Brand new DT Swiss R470 Road wheels. Again centrelock disc wheels, 12x100, 12x142, 700c and tubeless compatible. These are fitted with a Sram Xdr driver though. Came off a new bike and are surplus to requirements. Fitted with
    Specialized Turbo Pro tyres (700x26c) and tubes. These are also brand new and unused. The tyres aren't tubeless compatible BTW. But I will include the tubeless valves with the wheels in case you want to fit tubeless tyres.

    There's a little grease on the XDR driver from where I removed them from the bike, otherwise they're new. Looking for £220 posted for these. Or £200 if you don't want the tyres/tubes.

    Pics to follow and more items to add yet. Any questions, please ask. Thanks.


    5 Attachments

    • IMG_20210714_105816.jpg
    • IMG_20210704_182901.jpg
    • IMG_20210704_182913.jpg
    • IMG_20210704_182921.jpg
    • IMG_20210704_182646.jpg
  • .


    5 Attachments

    • IMG_20210714_110331.jpg
    • IMG_20210714_110320.jpg
    • IMG_20210714_110307.jpg
    • IMG_20210714_110254.jpg
    • IMG_20210714_110301.jpg
  • ..


    3 Attachments

    • IMG_20210714_110413.jpg
    • IMG_20210714_110430.jpg
    • IMG_20210714_110405.jpg
  • £250 posted without the tyres

    go on then, paypal?

  • DT Swiss...


    5 Attachments

    • IMG_20210714_110736.jpg
    • IMG_20210714_110807.jpg
    • IMG_20210714_110758.jpg
    • IMG_20210714_110725.jpg
    • IMG_20210714_110704.jpg
  • Couple more of the wheels and some close ups of the rotors.


    4 Attachments

    • IMG_20210714_110822.jpg
    • IMG_20210714_110828.jpg
    • IMG_20210714_110905.jpg
    • IMG_20210714_110836.jpg
  • Ha, that was quick. Already got someone interested, but I'll let you know if he falls through. Thanks Amey.

  • Got a set of these fitted to my fixed gear (Pro Vibe compact bars 40cm). I like the weight, width and drop but don't get on with the bend at the tops into the hoods. I'll need to remove them from my bike so may have some tape residue but they've only done about 8 rides since new so will be pretty mint. £40 posted.

    https://www.wiggle.co.uk/pro-vibe-compac­t-alloy-handlebar

  • XT 11 Speed Cassette. 11-42. Used but not abused. A bit of residue lube scum in the hard to reach spots as you'd expect. Removed from a bike when I upgraded to 12 speed and was running fine at that time. £45 posted.


    3 Attachments

    • IMG_20210706_203401.jpg
    • IMG_20210706_203419.jpg
    • IMG_20210706_203356.jpg
  • @cake cassette?

  • Sram rotors provisionally sold.

  • Third dibs if the first dibber & amey don't go for them

  • 👍

    More added...

    Hope freehub. Again removed for a microspline freehub when I went from 11 to 12 speed. It's the steel body version but still has the usual indentations from the cassette. Bearings smooth as, includes the end caps and washers. Came of a mtb hub, pretty sure it works with both the Pro2 and Pro4 models. Little bit of the green thingy missing as seen in the pics. £38 posted.

    Ragley stem. 31.8mm bar clamp, 1 1/8" steerer, 50mm length. I got this as a needed the low clamp height for a short fork steerer. But it's actually a really nice looking stem too. £20 posted.


    5 Attachments

    • IMG_20210714_180401.jpg
    • IMG_20210714_180329.jpg
    • IMG_20210714_180342.jpg
    • IMG_20210714_180117.jpg
    • IMG_20210714_180131.jpg
  • More...

    Hope QR end caps for Pro2 hubs. Full set front and rear. £8 posted.


    4 Attachments

    • IMG_20210714_180041.jpg
    • IMG_20210714_180212.jpg
    • IMG_20210714_180000.jpg
    • IMG_20210714_180159.jpg
  • Actually nm not sure I can hack orange hubs with green frame

  • Dibs the freehub

  • I'll count myself out for the hope wheels but I will take

    Hope QR end caps for Pro2 hubs. Full set front and rear. £8 posted.

  • Thanks. Replied to your PM.

  • QR adapters sold. Freehub provisionally sold. Hope wheels sold.

    Added...

    Shimano Deore BR-M615 disc brakes (no rotors). Used but always worked perfectly. Lots of life in the pads. £55 posted.


    5 Attachments

    • IMG_20210704_141248.jpg
    • IMG_20210704_141139.jpg
    • IMG_20210704_141220.jpg
    • IMG_20210704_141216.jpg
    • IMG_20210704_141129.jpg
  • Decided to keep the DT wheels, but I don't need the tyres so they're for sellz.

    Brand new specialized turbo pro 700x26c folding bead. "Gripton" compound and" blackbelt" protection. They look a good fast, light tyre to me, but I've not actual experience of them. Rrp seems to be £30 each, generally available for £24.99 each, so £30 posted the pair...

    Also edited title to reflect what's still for sales.


    1 Attachment

    • IMG_20210716_130013.jpg
  • Keen on the Deore brakes, what size bike were they fitted to?

  • Hi. They were on an 18.5" Trek Superfly 29er with 100mm xc forks. I can measure the hose lengths if that's more useful?

  • if it's not a massive pain, that'd be great actually

  • No worries. Measured from the arrows, the front is 760mm, rear 1155mm.

    @jackbepablo

    Cheers. D


    1 Attachment

    • IMG_20210718_165254.jpg
  • Post a reply
    • Bold
    • Italics
    • Link
    • Image
    • List
    • Quote
    • code
    • Preview
About

XT 11-42 cassette, Thomson X4 stem, road tyres, Pro vibe compact bars 40cm

Posted by Avatar for yetidamo @yetidamo

Actions