Looking for a stronglight crank puller, anyone have one spare?
if no response with a proper Stronglight puller then I've used one of these cheap bearing pullers many times, the cranks come off easily with no scratches or marks
Ah cool, good tip. May just order one of those since the real deal get pretty pricey on ebay for something i'll probably not use more than every couple years...
Get a large flat head screw driver and a hammer. Works for me :)
If you find a 23mm one (TA), you can use it with a wrap or two of PTFE plumbers’ tape on the thread, since Stronglight is 23.35mm.
I do have two TA extractors, but you may as well borrow one rather than buy, since it’s not the right one.
I know for a fact Rob Sargent has the Stronglight one, if you can visit his workshop.
I use the TA one, just like @Skülly said
Don't worry about formatting, just type in the text and we'll take care of making sense of it. We will auto-convert links, and if you put asterisks around words we will make them bold.
For a full reference visit the Markdown syntax.
© LFGSS, powered by microcosm.
Report a problem
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.