Carbon wheels/Sapim CX/DT240s/GP5000TL

Posted on
  • I've got my eyes on some DT wheels so these are up for sale, they are in superb condition, maybe a tiny amount of run out on the front but even my tight 7403 calipers (designed for much narrower rims!) don't touch. Here's a link below to a review although my wheelset (hubs) are the upgrade on these.

    Rims are bespoke Chinese, 44mm deep front and 50mm rear. Hubs are DT 240s straight pull, top hubs with stainless steel bearings and carriers. Spokes are Sapim CX flat straight pull. Tyres are as new Conti GP5000TL, and set up tubeless. Freehub is Shimano road 11sp although I am using a spacer and running an old school XT mtb 8 speed cassette to match my DA 7403. Cassette is not included although I do have spares if you are still 8sp. These weight in at approx 2250 grams with tyres and no cassette. Hubs and rims have had all decals removed for a totally stealth all black look.

    £350 to include postage, £325 collected from Brighton.

    https://www.bikeradar.com/reviews/compon­ents/wheels/wheel-sets/flux-350r-wheelse­t-review/








  • If still about on Monday I may drop you a line, currently waiting on some building work to be quoted so best not pull the trigger just yet...

  • Sure no worries.

  • That is an absolute bargain!

  • Pretty keen here @shawnb. Run out - do you mean slightly not true? Any idea on kms done?

  • Absolutely miniscule to be honest, as said my calipers/pads run super close to these wider than designed for rims.
    My strava log for the bike they are fitted to shows 214miles. I bought them from a friend of a friend who barely used them, they were his spare wheels, they are really good condition.

  • Ok great. Sent you a DM

  • hey @shawnb - I'll take these if still available? Check your direct messages. Cheers

  • sold

  • Post a reply
    • Bold
    • Italics
    • Link
    • Image
    • List
    • Quote
    • code
    • Preview
About

Carbon wheels/Sapim CX/DT240s/GP5000TL

Posted by Avatar for shawnb @shawnb

Actions