Shimano Alfine Di2 shifters BL-S705
Shimano Ultegra Di2 11 speed rear mech RD-6870
Shimano Di2 Battery SM-BTR2
Shimano Di2 3 port junction box SM-EW90
Shimano 4 port junction SM-JC41
Shimano Sw-R600 climbing shifter, this can connect into the Right hand shifter or the SM-EW90 junction box.
4 cables to connect it all, latest software update and charged.
Cable lengths 1200mm, 1000mm, 400mm, 300mm.
This has been sat on a bike which has hardly been used. Time to sell.
Not interested in splitting at this point.
Great for a gravel or CX setup. I used the rear mech with a Wolf tooth link, running a 11-32T cassette. It was never raced on.
Bargain! Proper versatile set up this is. Best of luck
The levers look a bit dusty in one picture, but it must be the lighting. Hoods and levers are in great condition no scuffs.
The 300mm cable which is used to connect the battery has a repair as it got caught in the seatpost when fitting. It works without an issue.
Cool setup, i am skint but would have happily stashed this until i build a 1x hillclimber
Treat yourself :)
Could very well be armtwisted if the rear derailleur was removed from the bundle
GS or SS rear derailleur?
It’s the SS, as I said I used it with a Wolf tooth link no problem.
Don't worry about formatting, just type in the text and we'll take care of making sense of it. We will auto-convert links, and if you put asterisks around words we will make them bold.
For a full reference visit the Markdown syntax.
© LFGSS, powered by microcosm.
Report a problem
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.