Hi. Someone sold me a SRAM Rival 1 rear derailleur and the B Bolt is seized inside the RD. As first I thought it was seized to the mech hanger so I sawed that away, but it's fully seized. Have tried penetrating oil + hammer + allen key. Going to drill it out tonight.
In theory it should be an easy job once it's out. According to SRAM you just need part 11.7518.060.000 (SRAM Rival1 B Bolt and Limit Screw Kit). However, I cannot for the life of me find out where to get this. These guys seem to sell but it's not in the list. These guys have a lot but not that specific part number.
Question: Could I use a different SRAM B Bolt set for this? Or do they have very specific lengths? Are any of them interchangeable? Would like to salvage this RD.
If anyone needs the answer to this, the Rival 1 bolt was discontinued and the Force 1 bolt is the same spec.
i.e. this one https://hollandbikeshop.com/sram/sram-race-onderdelen/sram-achter-derailleur-onderdelen/sram-bouten-set-tbv-force-cx-1-force-22-rival-22/
Don't worry about formatting, just type in the text and we'll take care of making sense of it. We will auto-convert links, and if you put asterisks around words we will make them bold.
For a full reference visit the Markdown syntax.
© LFGSS, powered by microcosm.
Report a problem
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.