FS: Stem jig £45

Posted on
  • A few people had expressed interest in the stem jig I made myself and I had bought multiples of some of the parts so I got another couple bits of ali bar stock and visited my old man today to use his lathe and I now have one jig ready to go and will have another once I get some more extrusion in.

    Most of it is off the shelf extrusions and brackets but the bar stock needs the ends squaring and a hole boring right through in the lathe.

    The aluminium bar acts quite well as a heatsink and the extrusion seems to shrug off getting toasted by the torch remarkably well.

    Base is 350mm long so realistically you could be building stems up to about 300mm centre to centre and the upright is 300mm so 250mm+ of rise/fall is possible.

    I've just done ali bar for 1 1/8" steerer and 31.8mm bar clamp but I could get bar stock that would replicate a 1" steerer and/or 26/25.4/22.2mm handlebar diameters if required.

    £45 inc paypal fees and postage costs.

    5 Attachments

    • IMG_7901.jpg
    • IMG_7903.jpg
    • IMG_7904.jpg
    • IMG_7907.jpg
    • IMG_7908.jpg
  • PS. Hope it's ok posting this in here, seemed a bit niche for general classifieds.

  • Yeah go on then

  • I have another jig ready to go now.

    Gonna do this one slightly cheaper as the only source I could find for silver 2060 was the unreliable eBay seller I’ve tried buying from before so I’ve taken the 2060 extrusion from my jig (replaced it with some black stuff so mine is all black now) and it has a couple small marks from use. I’ve put the marked side underneath so it’s all nice and fresh on top.

    £40 inc post and PayPal for this one.

    2 Attachments

    • 6F32D78D-4E8E-4158-9BB4-AC8A8C133263.jpeg
    • 105FE794-F31E-4EB9-A9C6-007D0817406D.jpeg
  • U gon send me this to Germany?
    Would be great!


  • Hey sorry, I have just noticed this. Don’t know why I didn’t get a notification someone had posted in here.

    Both the jigs sold (sorry I should have updated the thread) but if you’re interested I can make one for you.

  • Post a reply
    • Bold
    • Italics
    • Link
    • Image
    • List
    • Quote
    • code
    • Preview

FS: Stem jig £45

Posted by Avatar for M_V @M_V