FS: CAAD12 Disc 56cm frameset

Posted on
of 2
/ 2
  • I haven’t fully let go of this yet so I reserve the right to withdraw it from sale. Absolutely the best road bike frame I’ve ever ridden and I’d only be selling it because I have another disc road bike that will take bigger tyres.
    Max on this frame is about 30c.

    Frame is 56cm which measures out around 56 TT, 58 ST to the top. Geo easily found online. I believe this is 2016 model.
    Rad Kleinesque paint job orange to purple fade.
    Post mount front, full carbon fork.
    Flat mount rear.

    Issues with it:
    Paint is now chipped in a few places and more badly chipped and scraped on the non drive side of the down tube from when a Westminster council worker pushed a bin cart into me. One cable stop on the downtube has been drilled out to accept a di2 wire. So can either be used as electronic, 1x or bodged some other way. I used a 3d printed cable stop that fit in the hole but it’s not a permanent solution.
    Comes with headset, rotor bb30 bearings, China carbon 25.4 seatpost in Enve style and bottom bracket cable guide which is for full outer rear brake and electric front mech. I may have a mechanical one knocking around if I can find it.

    Price is £250 collected from SW15.
    No dibs, person with the HHSRBest build plans will buy it.

    1 Attachment

    • BFE215B7-BDA9-42AB-821E-D31706F50108.jpeg
  • As it was built

    1 Attachment

    • DF914D03-1C81-4DDD-92E7-2F6C80DE0BAF.jpeg
  • Will you ship abroad?

  • Worth it for the paint job alone. V Tidy.

  • That’s not stock paint job is it?! What’s the story there?

    It looks amazing 😉

  • @Dammit had it painted as a birthday present to himself I believe but then replaced it with a custom Talbot

  • would be all over this if I hadn't just bought a frameset last week!
    promised I wouldn't buy any more bikes this year...😩

  • No problem, you’ve only got a few days until it’s a new year and your promise is completed

  • true... I'm sure it'll be long gone before that though

  • I hope not... kinda

  • So fucking beautiful. Also, kinda my size...

  • I want this. I need to come up with a HHSRB to suit though.

  • I would really like to buy this frame. But it looks like you are undecided if you will sell or you will sell to the buyer who builds it to what you feel would be suitable?

    I have a pair of 700c dark grey open pro rims laced with Dr Swiss revolution on F&r black hope hubs or i could use my mavic Kysrium haute route carbon limited edition wheels - a single speed Sram carbon force 46t chainset with a 10sp ultegra cassette and Sram force 10sp carbon rear mech & 10sp Sram rear shifter- S-works saddle - Easton EC 90 post - Matt black Easton carbon havoc riser bar 35mm oversized diamater & easton havoc 35mm oversized stem - Shimano XT f&r frameset -

    I have been looking for a suitable frameset or an alternative to my Ti cyclocrosd I basically turned into a very fast & light hybrid... I am def interested in this Cannondale

  • I’m in talks with someone at the moment about a sale, I’ll let you know if it should fall through
    Thanks for the interest

  • Ok cool.

  • I'm going to keep my set up on my titanium frameset & I'm looking for a single speed along the lines of a Genesis day one or a Charge grinduro so good luck selling the frameset

  • Drop to £230. Still won’t post as I’d like potential buyers to come and view it to assess the above mentioned issues

  • Shipping is possible ?

  • No sorry, I don’t have the time or energy for that and I’d like the buyer to come and see it before paying.

  • I’ve friend in London
    I call him

  • Not normally my bag at all, but that is fucking lovely.

    That's all

  • Hi Phil, French guy is interested in the frame. What's the issue with the cable stop? Is the frame insert missing, or frame been drilled to pass di2 wire?

  • There is a cable stop where the cable for one of the derailleurs enters the downtube. It is part of the frame but has been drilled out, as you say, for a di2 wire. So there are 3 holes in the downtube, one still has a stop in it, on the left hand side which can be used for routing either derailleur, then a hole for the rear brake which is full outer cable or hydro hose, and now another hole where there should be a stop.

  • You can see in the picture where I had it built up, around the gear cable entering the frame is a white plastic piece which was the 3d printed cable stop. I should still have the file somewhere for another to be produced, possibly in metal this time

  • Post a reply
    • Bold
    • Italics
    • Link
    • Image
    • List
    • Quote
    • code
    • Preview

FS: CAAD12 Disc 56cm frameset

Posted by Avatar for PhilDAS @PhilDAS