• Have consolidated isen tooling and these are surplus to requirements.

    Main tube fixture is last gen anvil main tube. Holds things in phase, no tools needed in use. Have built about 200 frames with it, it's been great. Getting rid as we have the horizontal specific one. Landed here would be 1500 GBP, yours for 650.

    Fork fixture. Bringhelli stuff is fine if you are building non professionally. This needs phasing during set up, so it requires something flat and a modicum of thought, but once done will build straight forks, which is what it's supposed to do. It is supposed to only be 1" and 1 1/8" qr compatible, but I've modded for tapered steerer and bolt thru. Landed is £500, yours for £300 with bolt thru bits and bobs.

    Any questions just ask. Please remember these are professional tools so don't have instructions/need setting up. Any questions let me know, I can always walk you through that stuff.


    1 Attachment

    • 20180517_150325.jpg
  • I take it the Bringhelli fork fixture will still do 1 1/8" QR forks despite the mods? If so, I'll have 'em both.

  • Yes it will do both. It's really only done maximum gainz forks and ones like @BareNecessities. Slide into dm's.

  • Post a reply
    • Bold
    • Italics
    • Link
    • Image
    • List
    • Quote
    • code
    • Preview
About

FS: Anvil main tube fixture and bringhelli fork fixture

Posted by Avatar for coldharbour @coldharbour

Actions