New set of Prime Race disc wheels. When in the dropouts and the QR closed tight, I discovered today that the rim rocks side to side. Now there is no movement where the quick releases are in contact with the dropouts so I'm not sure why it's happening.
Anyone with a similar experience?
Sounds like you need to tighten the end cap/cone/whatever they're called on the hubs
If you take the skewer out and look down the axle, if its hex shaped, get an allen key in each side and try tightening them together
Thanks! Will give that a try tonight.
It will be cones as said already. Worth sorting asap as it can wreck your hubs if you leave it. Plus it's easy to do
Don't worry about formatting, just type in the text and we'll take care of making sense of it. We will auto-convert links, and if you put asterisks around words we will make them bold.
For a full reference visit the Markdown syntax.
© LFGSS, powered by microcosm.
Report a problem
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.