For Sale: Newly built Shimano hub bolt on sprocket with Campag Omega Strada V rims

Here are a set of wheels I just recently built, have had a thorough running in and both are true and round.
The front hub is a black Shimano 105 hub 32h laced 3 cross.
The rear is a Shimano XT front hub, that has had a 120mm x 10mm axle conversion with spacers, 36h laced 3 cross, and has a 18t sprocket bolted onto the disc mounts.
Both the conversion kit and the sprocket are from Velosolo and means spares are always available, hubs have very good reliabilty, the lockring (there isn't one) and sprocket can't come loose like on conventional hubs.
Both wheels are laced with double butted black spokes, front SAPIM, rear DT Swiss (just because).
The rims are Campagnolo Omega Strada Hardox V's and are lovely classic rims that weigh under 440g, yet very tough.
If I remember right, these where the top clincher rim Campagnolo did then.
Sale of bike for something else also forces sale of these wheels too.
As the cost to build them was over £210, plus £25 per wheel build cost, and all I'm asking is £175 as they've had almost no wear at all and really good wheels.
Sale does not include tyres.
More pics - http://www.flickr.com/photos/84475373@N04/

And my rear H&Son TB14 laced to a Goldtec is for sale here - https://www.lfgss.com/thread90941.html#post3054516
And a hand polished Campagnolo Vento 16 HPW front wheel - https://www.lfgss.com/thread90974.html#post3055894

Some better photos so you can get a better idea -