For Sale: Polo mallet, mallet heads, double brake lever

Posted on
Page
of 5
/ 5
Last Next
  • As some of you know I been doing some double brake lever for polo, I'm using Shimano Deore levers, silver ones, a Odessy piece for BMX, a file and patience. They have been tested for 3 or 4 people for a couple month now, with no mayor problems
    If you want to use your own lever it's possible too. some opinion about them

    I been doing some mallets for different peps in the last years or so, so I decide to do some for sale. The shafts are from ebay, the same ones I will use for my own mallets
    It is difficult to say if they are good aluminiun or not, as normally there is nothing writen on them. The head are the same ones I use.
    Also, I can do you a mallet if you give me the shaft, no problem.

    And last but not least, mallet heads, the ones with the crazy cutouts me and some other people had been using for the last months, the hold fine, they are light and give you good ball control.

    Prices
    double brake lever £30 each
    mallets £25 each
    heads £5 each

    by the way, I can post this to any where i the world, so please, even if you leave in the other side of the planet, get in touch


    4 Attachments

    • DSCN1649.jpg
    • DSCN1651.jpg
    • DSCN1646.jpg
    • DSCN1642.jpg
  • I need a lever dude!

  • is alredy in my bag

  • Yes!!!!

  • rik, 3 heads, with tabs for the bolt please.

  • already in my bag Gabes

  • i think we'll need more mallets Rik. I'll speak to the guys and let you know.
    Thanks for the lever see you tomorrow

  • 3 heads, with tabs for the bolt please.
    Will be at downham tonight.

  • Could i grab 1 lever and one head please

  • Yo Rik, What inner cables work with these?

  • normal MTB

    x2

  • tar G

  • Rik, I'll take 3 heads. Do you pre-drill the poles, or just screw them directly?

  • pre-drill

  • I am rik's answering machine.

  • Rik has probably already set off to polo. He is ALWAYS on court.

  • what are the jensonusa.com ones like...are these diy ones comparable etc?
    it says they can do the jensons for about 15 posted from the states..two barrel adjusters etc..

    http://www.jensonusa.com/store/product/B­L298E00-Dimension+Double+Barrel+Brake+Le­ver.aspx

  • Rik, I'll grab a lever off you if you can take it with you to Berlin!

  • Rik, I'll grab a lever off you if you can take it with you to Berlin!

    you going double brake tom?

  • Rik, would you be able to take 3 heads for me to Berlin ? Or if it's easier just please leave them with someone in London, i'll grab the when i'm over for the Open. Ta :)

  • Matt, Todd and Tom are getting double brakes, jump in the wagon

  • what are the jensonusa.com ones like...are these diy ones comparable etc?
    it says they can do the jensons for about 15 posted from the states..two barrel adjusters etc..

    http://www.jensonusa.com/store/product/B­L298E00-Dimension+Double+Barrel+Brake+Le­ver.aspx

    they are shite
    ask Brendan

  • Rik, I'll take 3 heads. Do you pre-drill the poles, or just screw them directly?

    I do two small holes, 2mm, so you can drill with the same diameter bite drill as your pole fot a tight finish

  • some opinion about them

    double brake lever £30 each

    ...and a quick monthly update on the lever after abuse on the courts, still as good as the day i got it. The bolt for the odyssey bmx dual mount came loose but that was easily tightened back in the garage. the workmanship on the lever makes some wonder if it is a factory produced lever, it really is that good. reminds me i must take some pictures of it.

    thank you rik!

  • they are shite
    ask Brendan

    they are not as good as riks for sure!

  • Post a reply
    • Bold
    • Italics
    • Link
    • Image
    • List
    • Quote
    • code
    • Preview
About

For Sale: Polo mallet, mallet heads, double brake lever

Posted by Avatar for rik @rik

Actions