Polo eBay finds/marketplace

Posted on
of 343
  • Now sorted

  • 175 though

    1 Attachment

    • D2937D95-377A-429E-ABA8-5B3606A34068.jpeg
  • Big gloves for big hands!
    Reebok 5K hockey "nhl"gloves - 14" size.

  • I'd be up for that I reckon.

  • Anyone has some 31.8 risers for a loaner bike?

  • Hey Folks
    I'm selling my polo bike. Sweet ride but haven't played since breaking my leg a few months after building it.
    It's a couplered frame, meaning you can break it in half very quickly for travelling and chuck in your suitcase.

    £750 or make me an offer.
    Can take off the seat post and drop the price a bit, but would like to avoid splitting bits.

    Frame : Max Power Medium 26” frame couplered

    • Rear derailleur hook
    • Cable mounts
    • Pivot brake mounts
    • Unpainted Alu

    Fork : Unpainted Max Power (nice rusty layer now)
    Rotor Guard : Max Power rotor guard in “raw” black

    Seatpost: Thomson Leyback
    Bontrager stem
    Straight bars
    Foam grips

    Brake : Front Avid BB7 mechanical disc
    Brake lever : Avid Speed Dial 7
    Cranks : Shimano SLX FCM665 Hollowtech II cranks + MRP chainring

    Rear Wheel
    • Mavic xm719 36hole wheel
    • Black spokes
    • Black Halo Hub

    Front Wheel
    • 32 h Hub (“A”? What’s that brand ? not sure )
    • Silver spokes

    Agi ( Agata)

    5 Attachments

    • bike.jpg
    • IMG-7741.JPG
    • IMG-7742.JPG
    • IMG-7747.JPG
    • IMG-7748.JPG
  • anyone got any hydraulic disc recommendations? Cheap and cheerful

  • Deore standard.

    Steer clear of XT's a number of us have had failures/warranties that result in long walks home.

  • anyone's got a fixed 26" wheel or a velosolo bolt-on disc cog?

  • I have a 26" fixed wheel for £20, £30 with tyre and tube.

  • I have a pair of knee shin pads for sale £10
    Ankle pads too.
    Some NIKE ACG shoes. £10

    a bunch of balls, and vintage heads free.

  • Want to sell /post the max power rotor guard

  • You looking for one or selling?

  • Buying in need of

  • It's about 30 or 35 each depending if you need caliper protection or just for the rotor.

    What's the build?

  • It’s rotor and calliper protection I need
    Building up a x life Scorpio frame got a set of 700c chukkers and 26 “ tobestreib with demolition hubs
    No sure which way to go
    Looking for a set of forks for a rotor also

    Want to fit a hydraulic disc

  • I'll say 26" is probably best as you can run thicker tyres.

    Forks wise you're probably looking at 410mm axle to crown.

    Get your hydro routed through the head tube and go for Shimano, you'll never go wrong with them. 2 years warranty (XT and below),3 years for XTR.

    IF bling is what you're after then get Hope.

  • Thanks for advice

  • Hmmm... Seems like the frame has negative BB drop.

    Do you have the frame and fork geometry? Failing that do you have the original forks?

  • Neither on both counts
    Been using as a pub bike have been running with a set of fu manchu brakeless
    The originals I wiped out on they are now in the big house in the sky

    Had the frame a while can’t remember where I picked it up think is intended use was for fgfs
    Presume it’s from Taiwan but never really found much info on it

  • Can I get in the uk

  • heeey.

    got a pair of Franklin 150 gloves, size M (i'm a L and they're fine).
    got some tape glue on them but only used in 2 or 3 games (i din't like 'em) so they're good.

    i can post for £20

  • also got these raceface knee/shin guards.
    size M

    will post for £12

  • Deore m6000 are best value. Beware deore and upper tier models all have ceramic pistons which are fragile if you jam your rotor into them when changing wheels or try to push them back in with a screwdriver, they crack and then spray a fine mist of hydro oil over everything, see it every week in my workshop. Its not that they are faulty, just been used a bit harshly.

    Alivio/acera MT400 sort of level are like £30 a brake, don't have servo wave (some folks don't like the immediate bang of power) or ceramic pistons. change the stock resin pads for quality sintered not ebay specials and you'll have a solid reliable cheap brake.

  • Stock resin pads are the best, deore ain't ceramic either are they? Just above.

  • Post a reply
    • Bold
    • Italics
    • Link
    • Image
    • List
    • Quote
    • code
    • Preview

Polo eBay finds/marketplace

Posted by Avatar for Shinscar @Shinscar