Anyone got a crown race setter that would work for 1.25" diameter? Near SE24.
Anyone south of the river have a torque wrench avaliable to borrow this Saturday for a few beers, got a stem and Crankset I need to install
Got a Bontrager one with 5NM preset.
One of these: https://www.trekbikes.com/gb/en_GB/equipment/cycling-accessories/bike-tools-maintenance/bontrager-preset-torque-wrench/p/08370/
Anyone have a VAX carpet cleaner/washer?
Anyone (preferably in SE) have a dura ace bottom bracket 7700 tool set I could borrow? (would buy too if you're interested in selling) I think the TL-FC31 is the only one I need.
It’s a while since I’ve used one but doesn’t the BBT-7 do the same job
Got a whole Shimano Special Tool set, N16.
It's an old school one, so no tool codes on them.
Nice thanks @DoktorPepe I'll check in with you when we're back to reality
Anyone has a portable CD drive/reader? Need to install a driver, download from manufacturer's site doesn't work... SE1 or SW19 preferably.
Got laptop with me so just need it for a few minutes while it is extracted/read.
Anyone have a tool for the 41mm Shimano external BBs like this? SM-BBR60 is the model
I am in NW10 so would have to be fairly near. I have the one for the slightly larger 44mm type ( thanks to @hamrack ) but there’s an adapter apparently? Or if it can be had cheaply online, I’d buy it, just hate to get it for a one-off...
In fairness, Most of the newer model external BBs from Shimano that you can buy now will use the smaller diameter interface. You need tool TL-FC25 to use the older tool.
You can still buy some BBs that use the larger size, I think the lower end (Tiagra, Deore) still do.
The new tool would probably get just as much use as any other BB tool.
Only reason I don't have one yet is that I haven't had to fit a newer BB yet!
You can get a cheap plastic adapter on ebay.
Not a bike tool, but anyone got a carpet hoover cleaning thing I could borrow for a couple days?
The adaptor comes with each BBR60 or its equivalent. Got loads of them and yeah have a couple going spare if you wanna pop by SE1. Or drop by your friendly bike shop and ask them if they'll spare you one?
Anyone have a 1" crown race setter in north london? Tufnell park and the surrounding areas
Does anyone have an ultra torque BB tool and 10mm long hex for removing and installing a UT bb and chainset, preferably in SE? Ta
Yes. PM me.
an extremely longshot, but does anyone have the SON tools for retrofitting the contact place onto dropouts for the SL dynamo system?
In particular the "Drilling Guide for Contact Plate Holes" and "Mounting Tool for Contact Plate"
Don't worry about formatting, just type in the text and we'll take care of making sense of it. We will auto-convert links, and if you put asterisks around words we will make them bold.
For a full reference visit the Markdown syntax.
© LFGSS, powered by microcosm.
Report a problem
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.