The last time it was up for sale here we were looking at £300 (it was reduced thanks to one of the worst cases of stuck seatposts, which is now sorted thanks to the expertise of a network rail engineer)
Most of the rest of the increase is due to a bunch of new additions which can be included in the sale and it’s set up like this, so i’d rather sell complete. This includes a new White Industries freewheel, fitting a new bottom bracket, adding a System Ex seatpost, 2x goldfinger brake levers, Odyssey trailmix bmx pedals, 2x NOS Shimano 105 brake calipers with new Kool Stop salmons, new brake cabling.
Otherwise, £300 if you want to go back to how the bike would be without the above extras. I’ll take various levels of discounts if you don’t want anything particular of the above. Will not be split further.
Here’s the details:
Dave Marsh Low Profile TT Frame (700x700c)
Fitted with a Campagnolo Chorus 1" Headset
Frame Sizing: 56cm Seat-tube (CTC) / 57cm Seat-tube (CTT) / 54cm Top-tube (CTC)
For 700c size wheels front and rear
125mm rear spacing / 100mm front spacing
Campagnolo drilled track ends
Shimano fork dropouts
Steel (BLB reckon it's Reynolds 753 after comparing it to their very own La Pivora frame and openly saying they'd rather have this haha!). Dent on down tube and various nicks, but this is one tough and light frame.
Frame is straight
One noticeable dent in the NDS down-tube from the bike falling on one side whilst in storage. However the steel is thick and other than the paint being chipped around the dent it is purely cosmetic. Could easily be rolled/filled at a welder near you!
British BB threading / For 27.2mm Seatpost / 1" Quill Stem
Rear wheel is one of Varno's - 40mm deep V Weinnemann rim on Quando hub. Fairly new rim tape fitted. 21t cog, fixed.
Currently set up for freewheel - White Industries 18t 3/32 inch Trails freewheel, bought new, which has only seen a couple of rides since coming out of the box.
Front wheel - 30mm Deep V from a Subrosa Malum. Braking surface rattle-canned black.
Stronglight 49T Crankset
KMC Chain (2 weeks old)
27.2 Black System Ex seatpost
Cinelli Unicanitor Saddle
Sakae 100mm Quill Stem
Easton EA30 risers (cut down to around 40cm)
Shimano 105 brake calipers with almost new Salmon Kool Stop pads
ODI Longneck grips - basically new
Vittoria Zaffiro tyres - 23c
Odyssey Trail Mix BMX pedals yellow.
Collection from Walton on Thames, 23mins from London Waterloo on the train. If you buy it I'll knock a tenner off to cover your ticket.
Dibs followed by PM please.
(also selling a Ridgeback Storm - check it out here)
(also selling a La Pavoni lever espresso coffee machine - check it out here)
Dave Marsh Lo Pro 56/57/54cm
£SOLD
The last time it was up for sale here we were looking at £300 (it was reduced thanks to one of the worst cases of stuck seatposts, which is now sorted thanks to the expertise of a network rail engineer)
Most of the rest of the increase is due to a bunch of new additions which can be included in the sale and it’s set up like this, so i’d rather sell complete. This includes a new White Industries freewheel, fitting a new bottom bracket, adding a System Ex seatpost, 2x goldfinger brake levers, Odyssey trailmix bmx pedals, 2x NOS Shimano 105 brake calipers with new Kool Stop salmons, new brake cabling.
Otherwise, £300 if you want to go back to how the bike would be without the above extras. I’ll take various levels of discounts if you don’t want anything particular of the above. Will not be split further.
Here’s the details:
Dave Marsh Low Profile TT Frame (700x700c)
Fitted with a Campagnolo Chorus 1" Headset
Frame Sizing: 56cm Seat-tube (CTC) / 57cm Seat-tube (CTT) / 54cm Top-tube (CTC)
For 700c size wheels front and rear
125mm rear spacing / 100mm front spacing
Campagnolo drilled track ends
Shimano fork dropouts
Steel (BLB reckon it's Reynolds 753 after comparing it to their very own La Pivora frame and openly saying they'd rather have this haha!). Dent on down tube and various nicks, but this is one tough and light frame.
Frame is straight
One noticeable dent in the NDS down-tube from the bike falling on one side whilst in storage. However the steel is thick and other than the paint being chipped around the dent it is purely cosmetic. Could easily be rolled/filled at a welder near you!
British BB threading / For 27.2mm Seatpost / 1" Quill Stem
Currently set up for freewheel - White Industries 18t 3/32 inch Trails freewheel, bought new, which has only seen a couple of rides since coming out of the box.
Collection from Walton on Thames, 23mins from London Waterloo on the train. If you buy it I'll knock a tenner off to cover your ticket.
Dibs followed by PM please.
(also selling a Ridgeback Storm - check it out here)
(also selling a La Pavoni lever espresso coffee machine - check it out here)