Trade: Tubular Rims and Tyres + Drop brake levers + Saddle

What I'm offering:

• 2x Tubular rims (Olympic Montreal rims. Made in Italy.)
  http://imgur.com/aNUoUGE
  
• 2x Vittoria Nuovo Pro 19 "Racing Team" Tubular tyres
  http://imgur.com/wV8ew13
  
• 2x Shimano 600 drop brake levers (Right and left) + front brake cable (nipple end)
  http://imgur.com/vF6B3aa
  
• Black saddle
  http://imgur.com/ceLMsDZ
  
• Older bicycle chain (not sure if 1/8 or 3/32)
  
  

Rims are in very good condition, barely used with brakes. No scuffs or dings as far as I can see. 32 holes.

Tyres have full tread left on them, only ridden twice by previous owner and once by me (no skidding), sidewalls look a little aged, but no issues.

Brake levers are fine afaik/can tell.

Items I would like:

• Mavic Open pro rims (or similar) (Open to the idea of other brands, or open sports)
  
• Goldfinger brake lever (right hand side only)
  
• Front brake cable (barrel end)
  
• Vittoria Randonneur tyres (or any other similar, decent clincher tyres)
  
• 700c x 23- 25-28 inner tubes
  
• Lockring tool
  
• Cable cutters
  
• 15 mm and 10mm spanners
  
• Metrix hex key set
  
• Chain breaker/tool
  
• Chain whip
  
• Drill (to get through masonry, brick or concrete) - would prefer to borrow this item, don't need to keep it.
  
• Brooks proofide
  
• 1/8" chain (prefer new)
  
• Spoke tool
  
  

I obviously don't expect to trade for everything on that list. Just PM or post what you want, and what you can offer. (Or if you have a better suggestion/alternative, let me know).

And here's the extra condition... I have no idea how to take tubular rims apart, or take the tyre off, so if you'd like them, I'd need to bring you the whole wheel, and have it disassembled (I'll keep the hubs and spokes). I also don't have a spanner, so will need one (15mm) to take the wheels off in the first place.

*Side note: I don't know how to build a wheel from scratch. Anybody who can help me with this process, I'd be very much grateful. I've PMed arup, so once I get the bits and bobs I need (rim, spokes, etc.) I'll touch base with him to build it, but in the meantime, if anybody else can help as well (and would like any of the above items), that'd be good.

Any questions, feel free to drop me a line.