You are reading a single comment by @Mr_Bump and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@Mr_Bump
NOW SOLD
the DT Swiss double butted spokes mated this hub to an Open pro ceramic (which got bent by a hit & run driver in feb & plod still not filed a report..grrrr)
Dura Ace 7700 hub; cosmetically there are the usual tell tale spoke marks near the holes and minor indentations to the freehub splines otherwise it is excellent. The only real downside is a single small pit to one of the cones, I'd been running it like this for some time without any issue and is still reasonably smooth in hand without any play at the axle.(I didn't actually notice any problem prior to inspection)
The hub shells are fine and the inner was cleaned & bearings/grease replaced middle of last year when the pit was discovered.
The spokes themselves are in good order with no damage and come complete with their brass nipples. The drive side spokes are a couple of mill shorter obviously and I have these bundled in two sets of 18 so as to reduce confusion later :)
There is no QR skewer included
Couldn't say how many miles on the hub in total but in excess of 8K
Price for the lot let's say £47 posted (within UK)
If one wants further photos please PM your email address & I'll forward on the files full size
http://farm8.staticflickr.com/7090/7341585912_12ede7cfbb_h.jpg