You are reading a single comment by @Aroogah and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@Aroogah
111m should be fine - 2mm wider on each side should get you the correct chainline. Just be sure to get the correct taper for your cranks: if they are ISO then get an ISO tapered BB. The Miche site should give you some info, or check the sites that sell the cranks online, they may have that info available as well.
I run a 113mm Shimano BB to match French made Stronglight cranks to my UK made Goldtec hubs, so it can be done. Who cares where's it's all made?