You are reading a single comment by @rusty and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@rusty
What do you think would be the minimum requirement for component theft protection with these kind of bolts?
Stem / steerer clamp (x2)
Stem / handlebar clamp (x4)
Saddle clamp (x2)
Seatpost Binder (x1)
Cranks (x2) Will they be able to be torqued up to 35 Nm?
Wheels (x4) assuming you have Phil Wood/Goldtec style hubs
This means you need 15 bolts, probably with a few different sizes of key, to secure most of your bike. I'd go for the grease and ball bearing route personally.